Bedienungsanleitung Toshiba TLP-T400 (Seite 33 von 36) (Englisch, Holländisch)

485609

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

6564

Others

The indicator lights inform you of internal abnormalities.

No power

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

Lamp went out during use, or won’t come on

⇒ Returns to standby after about 2 minutes. If the projector fails to

operate normally after turning the power back on, either the lamp

needs replacing, or there is a problem with the projector.

• If a lamp burns out, replace it with a new one.

• Unplug the power cord, and contact your dealer.

Power went out during use, or power won’t come on

⇒ Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not

blocked.

• Unplug the power cord and wait for a short while, then turn the

power back on.

• Clean the air filter.

p.56

❈ The icon will appear before the power goes out.

❈ After displaying the abnormal state for about 2 minutes, returns

to standby.

Power went out during use, or power won’t come on

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ After displaying the abnormal state for about 2 minutes, returns

to standby.

Power went out during use, or power won’t come on

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

p.58

❈ The icon will appear before the power goes out.

❈ After displaying the abnormal state for about 2 minutes, returns

to standby.

PRECAUTIONS

• Make sure to unplug the power cord if something goes wrong.

• If the power cord is unplugged before cooling is complete, give the lamp time to cool

before plugging it back in. If the lamp overheats it may fail to light. Unplugging the power

cord repeatedly when the temperature is high will shorten the life of the lamp. (Even if

you are not concerned about lamp lifetime, the light may not come on if you do not wait

at least 3 minutes.)

Trouble indications

LAMPTEMP

FAN

LAMPTEMP

FAN

ONLAMPTEMPFAN

LAMPTEMP

FAN

LAMPTEMP

FAN

or (Red lit)

(Off)

(Red lit) (Red lit)

(Green lit)

(Red lit) (Red lit)

(Off)

(Orange lit)

(Orange lit or flashing)

(Red lit or flashing)

(Red lit)

(Orange

flashing)

(Red lit)

If you think something is wrong, check the following before contacting customer service.

Please see “Trouble indications”

p.64

as well.

If This Happens Check

No power

Power goes out

during use

No picture

No audio

Picture not

displayed

correctly

Picture blurred

Part of picture

out of focus

Image is dark

Colors too light

Bad shading

Remote control

doesn’t work

Before calling service personnel

• Is the power cord plugged in? Is it connected to the projector?

• Is the lamp cover loose?

p.64

• Is the ambient temperature high?

p.64

• Is the air filter clogged?

p.64

• Is the air intake or air exhaust blocked?

p.64

• Is the projector turned on?

p.27

• Is the mute function on?

p.30

• Is the brightness setting minimized?

p.53

• Are the connections set up correctly?

p.22

• Are all the connected devices functioning properly?

• Is the projector turned on?

p.27

• Is the mute function on?

p.30

• Is the volume setting minimized?

p.28

• Are the connections set up correctly?

p.22

• Are all the connected devices functioning properly?

• Is the input signal supported by the projector?

p.68

p.69

• Is the correct video mode selected?

p.29

• Is the correct signal format selected?

p.29

• Is the selecting of RGB or Y/PB/PR input correct?

p.27

• Is there something generating an abnormal video signal, for

instance the video tape?

• Is the lens dirty?

p.57

• Is the lens focus adjusted optimally?

p.28

• Is the projection distance within the projector’s supported range?

p.21

• Is the projector’s screen placement angle tilted too far?

p.21

• Are the sharpness or sampling phase adjustments off?

p.53

p.29

• Are the brightness or contrast adjustments off?

p.53

• Is the lamp nearing the end of its service life?

p.32

• Are the color, tint, R-level, G-level, or B-level adjustments off?

p.53

• Is the screen dirty?

• Is the lamp nearing the end of its service life?

p.32

• Are the remote control’s batteries drained?

• Are the batteries inserted into the remote control correctly?

p.19

• Is the remote control being used within the effective range?

p.19

• Are there any obstructions between the remote control and

projector?

• Is the correct operation mode set?

p.20

• Are there any fluorescent or other bright lights shining at the

projector’s infrared remote sensor?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T400 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info