Bedienungsanleitung Toshiba TLP-T50 (Seite 10 von 20) (Englisch)

485565

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Operations

Connecting the power cord

Insert the power cord connector into the AC IN socket of the projector.

Insert the power cord plug into a wall or other power outlet.

Removing the lens cover

Be sure to remove the lens cover when the power is

turned on. If it is left on, it could become deformed due

to heat.

■ Turning the power on

Press the ON/STANDBY

button.

The power turns on, and the

following 3 green indicators light:

ON, LAMP, and FAN. After a

moment, the start-up screen

appears.

CAUTION

• Do not look into the lens during operation. Doing so could damage your vision.

• Do not block the air intake or exhaust. Doing so could cause a fire due to internal

overheating.

• Do not place your hands, face, or other objects near the air exhaust. Doing so could

cause burns, deform/break the object.

Notes

• The start-up screen will disappear after a moment. You can dismiss the start-up screen

before this by performing any operation. You can also configure the start-up screen not to

appear via the Display setting menu

p.29

• The first time you use the projector after purchase, after the start-up screen disappears,

the Language menu is displayed

p.21

Turning the power on and off

When the power cord is plugged in, the following three

green indicators will come on for several seconds: ON,

TEMP, and LAMP. Next, the ON indicator will change to

orange, indicating standby mode.

(Do not perform any operations while the 3 green

indicators are lit.)

(Supplied) Power cord connector

Start-up screen

FAN

TEMP

LAMP

VOL.

+VOL.

ON / STANDBYINPUT

AUTO SET

AUTO

KEYSTONE

INPUT

ON/

STANDBY

RESIZE

OFF

CALL

AUTO

MUTE

RESIZE

FREEZE

SET

KEYSTONE

Control panel

Remote

Control

COMPUTER

(

Y/P

)

S-VIDEOVIDEO

VIDEO

AUDIO

MONITOR

CONTROL

Before connection

• Read the owner’s manual of the device to be connected to the projector.

• Some types of computer cannot be used connected to this projector.

Check for an RGB output terminal, supported signal

p.36

, etc.

• Turn off the power of both devices before connection.

• The figure below is a sample connection. This does not mean that all of these devices

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Note

• The AUDIO terminal is common among all the devices for input terminal.

Connection

Computer

CRT monitor, etc.

To audio output

Audio cable

(for computer)

(supplied)

To RGB

output

Control cable

To RS-232C terminal

Computer (for control)

RGB cable

(supplied)

To Y/CB/CR

output

Green (Y)

Blue (CB),

Red (CR)

Yellow

(to video output)

To audio

output

White (L)

Red (R)

VCR

S-Video cable

(not supplied)

Video cable

(supplied)

To S-Video

output

To audio

output

White (L)

Red (R)

Monitor cable

Mini D-sub 15P-BNC

(not supplied)

Audio cable

(supplied)

DVD player

Conversion adapter

BNC-pin

(not supplied)

p.38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T50 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info