Bedienungsanleitung Toshiba TLP-T501 (Seite 30 von 36) (Englisch, Holländisch)

485612

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

5958

Others

Remove the lamp cover.

Loosen the screws, then pull up to direction of

the arrow with your fingers on the area shown

in the figure to remove the lamp cover. Be

careful to avoid breaking a nail or otherwise

injuring your fingers when doing so. (If the

screws are too tight to remove the lamp cover,

use any tool.)

Pull out the lamp.

Loosen the 2 screws holding the lamp in place,

and pull on the handle to remove the lamp.

Mount the new lamp.

Align the orientation, press down until the bottom is

reached, and lock in place using the two lamp

locking screws.

Replace the lamp cover.

Align the cover, and press it in, then screw in the

screws loosened in step

until the lamp cover is

no longer loose.

Reset the lamp timer.

See the lamp’s manual for instructions on resetting

the lamp timer.

Notes and Precautions

• Press the button twice to display (a rough guide) of the time of use from the Lamp

time item on the Status display menu.

p.32

• As a rule of thumb, it is recommended that the lamp should be replaced after 2,000

hours of use. When Lamp time reaches 2,000 hours, the

icon and a message will

appear. When any operation is performed, the message disappears.

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

lamp may fail to come on

p.64

, and the lamp’s lifetime may be shortened.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic

mercury. Be careful not to break used lamps, and dispose it in accordance with local

regulations.

Please read this chapter if the model you purchased includes a PC card slot.

This chapter briefly describes how to use supplied software applications other than the

Wireless utility.

■ How to use the Projector Configuration Tool

The Projector Configuration Tool is a software utility that allows you to set up the

projector for Infrastructure mode communications using a wireless LAN PC card.

When using this application for the first time, conduct Preparation

p.34

, and start with

the computer in Ad hoc transmission mode.

Check MAC address.

The MAC address is a unique address assigned to the wireless LAN PC card.

Display the MAC address on the screen, referring to “Displaying Information”

p.32

Note down the address for future use.

Launch the Projector Configuration Tool.

Upon launch, the window shown in the figure to the

right appears on the computer screen.

Click on the Browse button.

The computer starts searching for projectors. When it

finds one, “Please select” is displayed in the

Projector Selection field.

Select a projector.

Click on the button for the Projector Selection

field, then from the pull-down list that is displayed,

select

the project with the MAC address you noted down in

step

When a projector is selected, the computer obtains

information from that projector, and displays the results

in the boxes of the window.

Here, the following is possible:

From the File menu, select Save As..., and save the pre-modification settings on the

computer.

From the File menu, select Open, and apply an existing settings file to the projector.

Lamp replacement (Continued)

Lamp cover

How to use the supplied software

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T501 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info