Bedienungsanleitung Toshiba TLP-T520 (Seite 18 von 37) (Englisch)

485616

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Operations

■ Caution when using the wireless LAN functions

The Wireless LAN in this unit uses the 2.4 GHz waveband. If there is a similar wireless

LAN in the area, or a wireless device using the 2.4 GHz waveband, or a microwave

oven, the communication efficiency of this apparatus will be reduced, and may become

unusable, but it is not a fault. If this happens, check an area away from the current

location that will not cause radio interference to medical, industrial and public

equipment, and change to it, or stop using the unit.

■ Preparation

● Mount the supplied wireless LAN PC card into the projector, and select

PC card input

Referring to “Mounting a PC card,”

p.23

mount the supplied wireless LAN PC card, then

select PC card input in accordance with “Select input”

p.27

● Projector settings

The factory settings can be used as-is. However, if you need higher security, SSID,

Encryption and Key should be changed.

SSID can be changed only by using Projector Configuration Tool software

p.60

Other items can be changed by using Projector Configuration Tool software or from

“PC card setting menu”

p.55

• [Communication mode]:

Your projector is set to Ad-Hoc in the factory. See “How to Use the Projector

Configuration Tool”

p.60

if you would like to set the mode to Infrastructure. This

menu item is used only for channel confirmation and the mode change from

Infrastructure to Ad-Hoc.

• [SSID]

This is an ID code for connecting to specific individuals over a wireless LAN. This may

also be called “Network group” or “Network name”. Please read the following carefully.

1) The SSID is set to DPJ when shipped from the factory. If you leave this setting as it

is, it is possible that security may be compromised due to a third party using a

Wireless Utility within the possible communication area, so it is imperative that you

set a different SSID to the default settings before using the unit.

2) When you use the Ad-Hoc communication mode, if there is a similar SSID network

group (for example DPJ, DPJ1, DPJ2, etc.) in the possible communication area, it is

possible that your projector name will not be displayed in the Wireless Utility

projector list column. In this case, change the SSID to a completely different

character string.

• [Channel]

A channel can be changed by your choice. However, it will be changed automatically to

the other channel when the network group having the same SSID exists already in the

possible communication area.

Using the wireless LAN PC card (Continued)

• [Encryption]

Set the security encryption level. The higher the number of bits, the stronger the

encryption, and hence the harder it will be for a third party to decipher your

communications. However, setting higher encryption levels will slow down

communication speed.

When you need higher security, Encryption should be set to [128-bit].

• [Key]

The key must be set for any Encryption setting other than None. [64-bit] sets the key

length to 5 characters, [128-bit] to 13.

For security, a word written on a dictionary should not be used and Key should be

changed sometimes.

• [Projector name]

This can be used to identify projectors when communicating with multiple projectors, or

if there is a possibility that another person who is out of communication range will be

using the same projector. It is recommended this is set to prevent wrong transmission.

● Installing the applications

Install the applications on your computer, in accordance with “Installing the

applications”

p.24

● Computer settings

Refer to instruction manuals of your computer or wireless LAN PC card to perform the

following settings.

• Select Ad-Hoc (for some PC cards, this is Peer-to-Peer Group).

• Set the Channel to channel assigned to the projector (in factory reset mode, this is set

to 10). (For some computers, you cannot set the channel in Ad-Hoc mode. For this

case, use infrastructure communication mode.)

• Set SSID (For some types of PC card, use Network Name instead) as the same as

projector’s SSID (at factory shipment, this is set to DPJ).

• If Encryption and Key are set on the projector, set to the same values.

Note) It is imperative that the projector and computer encryption settings are the same.

If the settings are different, the encryption may be invalid when sending in the ad

hoc communication mode, so be careful.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T520 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info