Bedienungsanleitung Toshiba TLP-T521 (Seite 12 von 37) (Englisch)

485617

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

2322

Preparations

Before connection

• Read the owner’s manual of the device to be connected to the projector.

• Some types of computer cannot be used connected to this projector.

Check for an RGB output terminal, supported signal

p.69

, etc.

• Turn off the power of both devices before connection.

• The figure below is a sample connection. This does not mean that all of these devices

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Notes

• COMPUTER terminals 1 and 2 function identically.

• The AUDIO terminal doubles for devices connected to COMPUTER terminals 1 and 2.

Connection How to use the PC card slot

Please read this chapter if the model you purchased includes a PC card slot.

The wireless LAN PC card enables you to connect the projector wirelessly with a

personal computer that supports IEEE802.11b based wireless LAN.

p.33

(Please note

that communication between all the computers based on IEEE802.11b and this projector

is not guaranteed.) You can also use a commercially available memory card to project

JPEG image files using this projector.

p.41

Please follow the steps below when removing

or mounting a PC card.

■ Mounting a PC card

q Remove the PC card slot cover.

Press lightly on the circle (“O”) while

sliding the cover in the direction of the

arrow.

Card slot cover

w Insert the PC card.

After making sure of the card

orientation, press it in firmly until it

stops.

PC Card

e Replace the PC card slot cover.

Replace the PC card slot cover to keep

dust from entering.

■ Removing a PC card

q Look at CARD indicator.

If it is off, proceed to step r.

UNMOUNT button

CARD indicator

w Press the UNMOUNT button.

Begins processing for PC card removal

e Wait until CARD indicator goes

out.

Never remove the PC card while lit.

Doing so could damage the PC card or

corrupt your data.

r Press the Eject button.

The Eject button is a bit stiff, so press

firmly while supporting the projector.

Be careful to avoid injury when doing

so.

Eject button

■ If CARD indicator turns red

Press the RESET switch with a thin pin or

similar implement (it is at the bottom of a

recess).

RESET switch

CARD indicator

USB

COMPUTER

(

Y/P

)

S-VIDEOVIDEO

VIDEO

R - AUDIO - L

AUDIO

MONITOR

CONTROL

p.71

p.52

Computer Desktop computer

To audio output

To USB terminal

USB cable

Audio cable

(for computer)

(supplied)

To RGB

output

Control cable

To RS-232C terminal

Computer (for control)

RGB cable

(supplied)

To Y/CB/CR

output

Green (Y)

Blue (C

B),

Red (C

Yellow

(to video output)

To audio

output

White (L)

Red (R)

VCR

S-Video cable

(not supplied)

AV cable

(supplied)

To S-Video

output

To audio

output

White (L)

Red (R)

To audio

output

To RGB

output

Monitor cable

Mini D-sub 15P-BNC

(not supplied)

Audio cable

(not supplied)

DVD player

Conversion

adapter

BNC-pin

(not supplied)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T521 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info