Bedienungsanleitung Toshiba TLP-T701 (Seite 18 von 36) (Englisch, Holländisch)

485614

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operations

■ Displaying a computer’s screen via the projector

Launch the Wireless Utility software

application.

When the Wireless Utility launches, the Screen

image transmission mode window appears on the

computer screen.

To switch to the Screen image transmission mode

window from another mode (File or Document

camera), click on the Screen Image icon

Select Transmission mode.

Click on Update automatically or Update manually. See step

for the meanings of

Update automatically and Update manually.

Click on the Advanced button.

The Advanced Settings dialog appears. Set the

dialog as shown below, as necessary.

• Interruption

Select the No Interruptions checkbox to prevent

other computer from sending interrupts to the

projector during your transmission.

• Mode

Selecting High quality improves the quality of the

projected image, but lowers communication speed.

Selecting High speed has the opposite effect.

•Window

Select the Place in Tasktray at the start of

transmission checkbox to iconify the Wireless

Utility and place it in the computer’s tasktray

when transmission initiated.

To display the window, double click on this icon, or

right click and select Open from the popup menu.

Transmission can be started and stopped from this

popup menu in accordance with the preceding

instructions, without displaying the Wireless

utility window.

■ Preparation

● Mount the supplied wireless LAN PC card into the projector, and select

PC card input

Referring to “Mounting a PC card,”

p.23

mount the supplied wireless LAN PC card, then

select PC card input in accordance with “Select input”

p.27

● Projector settings

The factory settings can be used as-is. If necessary, conduct the following settings,

referring to “How to use the menu”

p.52

and “The PC card setting menu”

p.54

• [Communication mode]:

Your projector is set to Ad-Hoc in the factory. See “How to Use the Projector

Configuration Tool”

p.59

if you would like to set the mode to Infrastructure. This

menu item is used only for channel confirmation and the mode change from

Infrastructure to Ad-Hoc.

• [Channel]

This item cannot be changed currently. This is function for the future.

• [Encryption]

Set the security encryption level. The higher the number of bits, the stronger the

encryption, and hence the harder it will be for a third party to decipher your

communications. However, setting higher encryption levels will slow down

communication speed.

• [Key]

The key must be set for any encryption setting other than None. [64-bit] sets the key

length to 5 characters, [128-bit] to 13.

• [Projector name]

This can be used to identify projectors when communicating with multiple projectors, or

if there is a possibility that another person who is out of communication range will be

using the same projector. It is recommended this is set to prevent wrong transmission.

● Installing the applications

Install the applications on your computer, in accordance with “Installing the

applications”

p.24

● Computer settings

Refer to instruction manuals of your computer or wireless LAN PC card to perform the

following settings.

• Select Ad-Hoc (for some PC cards, this is Peer-to-Peer Group).

• Set the Channel to channel assigned to the projector (in factory reset mode, this is set

to 10). (For some computers, you cannot set the channel in Ad-Hoc mode. For this

case, use infrastructure communication mode.)

• Set SSID (For some types of PC card, use Network Name instead) as the same as

projector’s SSID (at factory shipment, this is set to DPJ).

• If Encryption and Key are set on the projector, set to the same values.

Using the wireless LAN PC card (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T701 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info