Bedienungsanleitung Toshiba TLP-T701 (Seite 25 von 36) (Englisch, Holländisch)

485614

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

4948

Operations

W.BALANCE OVERLAY

LOCK

STORE

IMAGE

ARM LIGHT

CAMERACAMERA

GAIN

Using the document camera (Continued)

■

Sending the camera’s images to a computer (Models equipped with PC card slot)

Models equipped with a PC card slot can use a wireless LAN PC card to send images

taken with the document camera to a computer in JPEG format, and open them, or

save them to disk.

Preparing the computer and projector

• Mount the supplied wireless LAN PC card referring to “Mounting a PC card”

p.23

, and

select PC card input in accordance with “Select input”

p.27

• Set up the computer and projector in accordance with “Preparation”

p.34

, and enable

wireless LAN communication.

Operating the projector

q Switch to camera input.

w Display the camera image, and press the STORE IMAGE

button.

A message appears on the screen, confirming that you wish

to save the image.

e Press the

button to save the image.

(To not save the image, use the

buttons to select No, then press the

button.)

The image data is temporarily saved in the projector as a JPEG file.

When the save is complete a message appears, then disappears after a moment.

Operating the computer

q Launch the Wireless Utility software application.

w Click on the Document camera icon

The Wireless Utility

window changes to

Document camera

mode.

e Select Open a file or Save to Disk.

If you only want to view the image taken with the document camera on the computer

screen, select Open a file.

To save the JPEG file sent from the projector to disk, select Save to Disk.

r Select the projector on which the images

were temporarily saved in step

A list of the MAC addresses of the wireless

LAN PC cards

p.32

p.59

mounted on the

projectors that are available for communication

appears. (If projector name has been set up

already, it is shown instead of the MAC

address.) Select the desired projector from this

list.

Then icon

is displayed on the projector’s

screen for few seconds.

t Click on the button.

If Open a file was selected in step e

Open the JPEG file sent from the projector, and display it on the computer. The

software application linked to the jpg extension on that computer displays the file.

If Save to Disk was selected in step e

A dialog box appears, prompting you to select a location in which to save the

JPEG file sent from the projector. Specify a file name in this dialog box to save the

file.

To view or save another image from the camera, repeat w and e of step

, and t of step

as many times as necessary.

Notes

• Only one image can be saved on this projector temporarily at a time. If another image is

saved, the current one is overwritten.

• Any adjustments other than CAMERA GAIN (+/–) and Sharpness will not be reflected

on the forwarded image.

• It is not possible to photograph resized or frozen images.

• The size of the saved file will vary, depending on the image.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T701 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info