Bedienungsanleitung Toshiba TLP-T701 (Seite 31 von 36) (Englisch, Holländisch)

485614

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

6160

Others

How to use the supplied software (Continued)

Configure the projector.

[Channel]

This item cannot be changed currently.

[Encryption]

Click on the

button to select [Off], [64 bit], or [128 bit].

[Key]

This accepts input if Encryption is set to other than Off (input is required). Input a

value from the keyboard.

[Communication mode]

Select Infrastructure by clicking the

button.

[SSID]

This is an ID code for connecting to specific individuals over a wireless LAN. This field

accepts input when set to Infrastructure Transmission Mode. Set the SSID to the

same value as the access point. In factory shipment, this is set to DPJ.

[Projector name]

It is recommended this is set to prevent wrong transmission.

p.34

[DHCP]

Specify by clicking the

button. If this is set to Used, the IP Address, Subnet

Mask, and Gateway below are set automatically.

Consult with a network administrator for the settings below, if DHCP is not used.

[IP Address]

An IP (Internet Protocol) is a data communication protocol. The delivery destination is

an IP address.

[Subnet Mask]

This value is to set a limit on the range of IP addresses, and set up a number of sub-

networks.

[Gateway]

This is a relay point for connecting different types of network.

Press the Settings button.

Communication begins, and the computer configures the projector. When setup is

finished, a message appears in the window telling you than setup is complete.

From the File menu, select Save As..., and save the settings file on the computer.

■ How to use the JPEG Conversion Tool

The JPEG Conversion Tool converts JPEG files not supported by the projector, image

files in other formats, Microsoft

PowerPoint

files, and the like into JPEG files

supported by the projector. The JPEG files converted with this tool can be displayed by

sending them using the wireless LAN PC card

p.37

, or saving them on a memory PC

card

p.41

● Launching the JPEG Conversion Tool

The window shown in the figure to the right appears on the computer

screen.

Drag the Image Quality Settings slider to the left or right to set the

image quality of the file after conversion. Lower values create smaller

files, but lower the image quality. (It is not possible to restore the

quality of an image after it has been lowered.)

● Converting an image file

This converts JPEG files using compression formats not supported by the projector,

Windows

metafiles (wmf), and bitmapped files (bmp) into JPEG files.

(1) In the Conversion Method field, select Converting image

file. (Status on launch)

(2) In the File settings field, click on the Browse button for

Original Image File Name.

The Open dialog box appears.

(3) In the Open dialog box:

(a) Specify the location of the file to be converted; and

(b) In the Files of Type field, click on the

button to

select the file format. A list of files of that format appear

in the Open dialog box.

(4) In the Open dialog box, select the file to convert,

then click on the Open button.

(5) In the JPEG Conversion Tool window, in the File

settings field, select Browse for File name after

conversion. The Save As dialog box appears.

(6) In the Save As dialog box:

(a) Specify the location in which to save the

converted file;

(b) Enter a file name of up to 8 characters in the

File Name field; and

(7) (a) In the JPEG Conversion Tool, click on the Conversion button.

(b) A confirmation dialog box opens. Click Yes.

The computer converts the file. When it finishes a message

appears informing you that a JPEG file has been created.

(1)

(2)

(5)

(7)-(a)

(1)

(2)

(5)

(7)-(a)

(3)-(b)(3)-(b)

(3)-(a)

(4)

(6)-(b) (6)-(c)

(6)-(a)

(7)-(b)(7)-(b)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T701 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info