Bedienungsanleitung Toshiba TLP-T70M (Seite 17 von 26) (Englisch)

485568

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Operations

■ The display setting menu

Use this menu to set screen display-related items.

(Full): Display with LCD panel’s resolution

(Thru): Display with sampling resolution (for computer input)

(Wide): Wide-screen display (for Video, S-video, and Y/P

)

Select one of the languages below to use for displaying menus and messages

[ : Enter setting mode] [ :Selection] [Apply: ]

English/Français/Deutsch/Italiano/Español/

Português/ / / /

Screen to display when there is no input signal

(Logo) (Blue) (None)

Display icons as function guides On Off

Display start-up screen when power turned on On Off

Description

Item

Screen size

Language

Background

Icon

Start-up screen

Notes

• If “Thru” is selected for screen size, portions exceeding the pixel count of the LCD panel

p.45

will not appear on the screen. Note that for RGB signals with clock speeds

SXGA3_60

p.46

or lower, all input pixel signals are sampled. (This effect is noticeable

when the screen is enlarged using the Resize function

p.29

). However, if the clock speed

is higher than this, the RGB pixel signal is reduced before sampling.

• Displaying the images with the aspect ratio different from the original with the purpose of

other than the personal and private viewing, using the screen size menu may violate the

■ Reset menu (Special menu)

When other menus are not displayed and the button is held down, the menu appears.

• When the screen is placed vertically, and Auto keystone correction is executed, but the

keystone correction is not successful, stow the foot adjuster in its original position, place

the projector on a flat surface, select Horizontal reference value reset, and press the

button.

• Select Reset All and press the

button to return all menu items to the factory settings.

Reset the horizontal reference value for Auto keystone correction

[ : Enter execution mode] [Yes No] [Apply: ]

Reset all menu items to their factory settings

[ : Enter execution mode] [Yes No] [Apply: ]

DescriptionItem

Horizontal reference

value reset

Reset all

Using the menu (Continued)

■ The image adjustment menu

Use this menu to adjust image-related items.

Items that can be adjusted are marked with “Ye s ”, and those that cannot are marked with “No”.

Item Description

Computer

Y/PB/PR Video S-video

Camera

Contrast

Lower Higher

Yes Yes Yes Yes Yes

Brightness

Darker Brighter

Yes Yes Yes Yes Yes

Color

Lighter Deeper

N o Ye s Ye s Ye s No

Tint

[Note 1]

Reddish Greenish

No No Yes Yes No

Sharpness

Softer Sharper

N o Ye s Ye s Ye s Ye s

R-level

Less red More red

Yes Yes Yes Yes Yes

G-level

Less green More green

Yes Yes Yes Yes Yes

B-level

Less blue More blue

Yes Yes Yes Yes Yes

Up/down shift

[Note 2]

Shift down Shift up

N o Ye s Ye s Ye s No

Notes

1: Tint can only be adjusted when Video mode

p.26

is set to NTSC or NTSC4.43.

2: Up/down shift can only be adjusted when Screen size

p.33

is set Wide.

■ The default setting menu

This menu shows placement status and other settings.

Sets projection mode in accordance with Placement Style

Sets the period of time to wait until turning off the power after signal input stops:

Off (not turned off) 1 min 2 min ... 60 min

Sets whether to turn on the power when the ON/STANDBY button is pressed

(Manual), or when the power cord is plugged in (Auto). Manual Auto

Sets the lamp power Standard Low

Sets the camera’s shutter speed to either (50Hz) or (60Hz).

50Hz 60Hz.

Sets the camera’s white balance to (Auto) or (Fixed).

Auto Fixed.

Description

Item

Projection

mode

No signal

power off

Power on

Lamp power

[Note 1]

Shutter speed

White balance

[Note 2]

(Back hung

from ceiling)

(Placed

on floor)

(Rear)

(Hung from

ceiling)

p.19

Notes

1: When lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets

quieter. This setting will be cleared when you turn the power off. The setting will be back to

“Standard” when the power is turned on next time.

2: White balance, if set to Fixed, is reset upon power off and the Auto is resumed the next time the

unit is turned on. (Models with the document camera)

Notes

• Note that if Power on is set to Auto, then if the power cord is plugged in when power is

restored after a power outage, the projector power will come on.

• Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power.

Unplugging the power cord to cut off the power will shorten the life of the lamp.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-T70M Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info