Bedienungsanleitung Toshiba tlp x100 (Seite 5 von 29) (Englisch)

215803

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Before Using

IMPORTANT SAFETY INSTRUCTIONS (Continued)

19. If glass components,

including lens and lamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and

a lamp.

If these should break, please

handle with care to avoid injury

and contact your dealer for repair

service. Avoid any broken pieces of

glass since they may cause injury.

In the unlikely event that the lamp

ruptures, thoroughly clean the area

around the projector and discard

any edible items placed in that area

since they may be contaminated.

20. Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other

hazards. Refer all servicing to

qualiﬁed service personnel.

21. Replacement Parts

When replacement parts are

required, be sure the service

technician has used replacement

parts speciﬁed by the manufacturer

or have the same characteristics

as the original part.

Unauthorized substitutions may

result in ﬁre, electric shock, or

other hazards.

(Only the replacement of the lamp

should be made by users.)

22. Safety Check

Upon completion of any service

or repairs to this product, ask

the service technician to perform

safety checks to verify that the

product is in proper operating

condition.

23. Do not leave thermal-

paper documents or easily

deformed items on top

of the unit or near the air

exhaust for long periods of

time.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

24. Do not use the product

in a closed installation

location.

Do not place the product in a box

or in any other closed installation

location. Otherwise it may

overheat, which could result in a

risk of ﬁre.

POWER SUPPLY INFORMATION

If your line voltage is 220 to 240 V, use one of the following types of cable/plug.

Plug

configuration

Plug type

Australian

240 V

10 A

North American

240 V

15 A

Switzerland

240 V

6 A

Line voltage

EURO

220 – 240 V

200 – 240 V

Plug

configuration

Plug type Line voltage

Use a 5 A fuse which is approved by

ASTA or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on the

lens and the crucial internal parts. Do not use the unit for at least 2 hours when there is an

extreme or sudden change in temperature to prevent the unit from possible damage.

Place and Manner of Installation

Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening

their lives, and darkening the screen.

Do not use this product in the upright position or tilt it up or down by more than 20° from

level. Doing so may cause a failure or shorten the life of the product.

Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

Moving the projector from a low-temperature room to a high-temperature room may cause

condensation on the lens or internal parts. If you continue to use it in that situation, it may

malfunction. Wait until the condensation naturally disappears.

In a high altitude location where air is thin, cooling efﬁciency is reduced so use the

projector with [Fan mode] set to [High].

p.41

Only plug the power cord into outlets rated for use with the power cord’s speciﬁed voltage range.

Do not overload extension cords or power strips as this can result in ﬁre or electric shock.

Route the power cable or the connecting cable away from where people could trip over it.

The projector may fall down, which could result in severe injury.

Be sure the power cord is easily reached for unplugging in case of emergency. Do not

place any obstacles near a wall outlet in which the cord is plugged.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time as they will leave marks on the ﬁnish.

Do not use a chemically saturated cloth.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp x100 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba tlp x100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info