Bedienungsanleitung Toshiba tlp x100 (Seite 20 von 29) (Englisch)

215803

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Operations

Detailed description

[Screen size]

Normal• : Enlarge an input image to ﬁt the screen without changing the aspect

ratio of video signals.

Full• : Displays an input image in 1024 × 768 dot resolution by enlarging it to

ﬁll the entire screen. (X100)

Displays an input image in 1280 x 800 dot resolution by enlarging it to

ﬁll the entire screen. (WX100)

Thru• :

Displays an input image in the native resolution of the video signals. Thru

display is not available for Y/PB/PR, Video and S-Video-input images.

The larger image than the screen size will be displayed over the

screen. The input image may appear vertically long with some

frequencies of video signals.

Wide

(X100)

• : Displays an input image in the center of the screen with a 16:9 aspect

ratio by enlarging it to ﬁt the width of the screen. The upper and lower

portions of the image will be compressed.

Wide display is not available for Computer-input images.

4:3 zoom

(WX100)

• : Displays an input image with a 4:3 aspect ratio by enlarging it

vertically. The enlarged image will be displayed over the screen. 4:3

zoom display is not available for computer images.

For Y/PB/PR input, screen size setting function is not available for the video signals

with a 16:9 aspect ratio.

•

Note

If you use the screen size setting function on commercial video software, broadcast

or cable-broadcasting programs to display images with the varying aspect ratio

except for the purpose of your private viewing and listening, it may infringe the

[Up/down shift]

Shifts the projected image vertically when [Screen size] is [Wide] for X100.

Shifts the projected image vertically when [Screen size] is [4:3 zoom] for WX100.

[Blackboard mode]

Projects the image in colors more like projecting on a screen.

Precaution

The projected image may differ depending on the type, color, and material of the

blackboard and wall even if the selected color is the same as the projected screens.

[Background]

TOSHIBA is set for [Logo] by factory setting.

If user’s logo has been registered, it is displayed when [Logo] is set for background.

[Start-up screen]

If user’s logo has been registered and this setting is [On], the logo is displayed at start-up.

[User logo]

Registers a part of the image that is input from computer, as a stationary picture and

displays it as a logo at start-up and when no signal is input.

•

Using the menus (Continued)

How to register user logo

Project a picture to register.

Select [User logo] in the Display setting menu, and press the or

button.

Select <Logo registration> from the displayed menu list and press

the button.

The registration area is displayed for conﬁrmation. Select [OK]

and press the button.

If the registered picture does not fall within the display area, operate the

computer to scroll the screen.

Select [Yes] to register and press the button.

Registration starts.

A message is displayed while registration is in process.

Notes

You can register a logo when the input is set to Computer.

The area that can be registered is 512 x 384 dots for X100 and 640 x 400 dots for

WX100, at the center of the screen. To register a company logo, prepare the image

within the limit.

Only one logo can be registered. When a new image is registered, the old one is

erased.

The time needed to register or display the image varies depending on the data size.

If you use this function on commercial video software, broadcast or cable-

broadcasting except for the purpose of your private viewing and listening, it may

infringe the copyright protected by the copyright laws.

Select the size of the registered logo.

: Displays the registered image in original size at center of the screen.

: Displays the registered image by enlarging fully in the screen.

(As processed digitally, the image quality is degraded.)

Sets background color when [Center] is selected for the logo [Display style].

You can preview the registered logo.

You can reset the registered logo, display style and background to the factory

setting. (The logo set for the start-up screen and background is reset.)

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp x100 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba tlp x100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info