Bedienungsanleitung Toshiba tlp x150 (Seite 17 von 35) (Englisch)

215805

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Operations

Freezing the image (Freeze)

This function is used to pause or freeze a video during a presentation.

Press the remote control’s FREEZE button.

The picture will pause. To release the freeze function, press the

FREEZE button again.

Notes

The icon will appear while the freeze function is in effect.

Other operations will also release the freeze function.

Even if an image is frozen on the projector, the pictures are running

on the video or other equipment.

Using this function on commercial video software, broadcast or

cable-broadcasting except for the purpose of your private viewing

and listening may infringe the copyright protected by the copyright

laws.

Setting the password

How to change password

The default password is 000000.

Select [Password] in the Default setting 2 menu and press the or

button.

Select [Password registration] from the next menu, and press the

button.

The password entry screen is displayed.

Enter the current password (6-digit number) using numeric keys of the

remote control.

Enter [000000] (6 zeros) for the ﬁrst change.

The password is not displayed. Instead it appears as [******].

Enter a new password (6-digit number).

Re-enter the new password for conﬁrmation.

Note

Please do not forget your password or you will be unable to access the unit. If

that happens, you will need to contact your dealer.

•



•



•

Remote

control

How to set password (from [Off] to [On])

Select [Password] in the Default setting 2 menu and press the or

button.

Select [Password setting], and press the

button.

Select [On].

Select [OK] and press the

button.

The password entry screen is displayed.

Enter the password using the numeric keys of the remote control.

The password setting will be set as [On].

How to operate when password is [On]

Turn on the power.

The lamp lights and the password entry screen appears.

Enter the password using the numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector

goes into normal operation. If the password is incorrect, a message will appear

prompting you to re-enter the password, and the password entry screen is displayed

again. If you enter an incorrect password more than 5 times, the projector will

automatically power off and enter standby mode.

Note

When the password setting is [On], the password function will be enabled only

when the projector is restarted after the power cord has been unplugged.

The password that you set will not be enabled when restarting from standby mode

without unplugging the power cord.

How to set password (from [On] to [Off])

Select [Password] in the Default setting 2 menu and press the or

button.

The password entry screen is displayed.

Enter the password using the numeric keys of the remote control.

Select [Password setting] and press the

button.

Select [OFF].

Select [OK] and press the

button.

•

Using handy features (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp x150 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info