Bedienungsanleitung Toshiba TLP-X200 (Seite 35 von 53) (Englisch)

485655

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

Network/

USB memory

Click the Advanced button.

The Movie ﬁle: Advanced Settings dialog

appears. Set the dialog as shown below, as

necessary.

Interruption

Check the No Interruptions checkbox to

prevent other computers from interrupting the

projector, for example, during a presentation.

Transmission Mode (Sound)

Check the Transmit sound to a projector

(Only when connected with one projector)

checkbox to transmit the sound being played on

a computer to the projector.

Autostart

Check the Start playing the ﬁle automatically

when starting transmission checkbox to

automatically start playing the video ﬁle when

connecting to the projector.

Repeat

Check the Play repeatedly after the end of playing checkbox to automatically

repeat from the beginning when the ﬁle reaches the end.

Click the Browse button and select

the ﬁle to send.

Clicking on the Browse button displays the Open

dialog box. Select the ﬁle to send then click the

Open button.

The selected ﬁle is added to the pull-down list in

the Network Utility’s Select ﬁle ﬁeld.

Select the ﬁle to send from the pull-

down list of the Transmission File

ﬁeld.

Click the Transmission File ﬁeld’s button to display the

pull-down list. Select the ﬁle to send from this list.

A thumbnail of the selected ﬁle appears in the

Preview box. The ﬁle displayed here will be

transmitted.

Step

can be skipped.

The way that drag and drop the ﬁle to send from the desktop or Windows Explorer into

the Preview box is also available. In this case as well, the selected ﬁle is added to the

pull-down list.

Note

You may not select a ﬁle by drag and drop with Windows Vista

•

Select the projector to transmit to.

The IDs of projectors accessible for transmission

will be listed. (If the projector name has been

set up already, it is shown.) Select the checkbox

of the projector to be transmitted to from this

list. Then icon

is displayed on the projector's

screen for a few seconds.

It is possible to select only one projector.

Click the button.

The selected ﬁle's image is displayed by the projector and the Control window appears

as well.

Play the video ﬁle via the Control window.

The function of each button and box is as follows:

(Current position): Indicates the playing position. Dragging the slider

can move the playing position.

(Play): Starts playing the video ﬁle.

(Freeze): The picture is paused.

(Stop): Stops playing the video ﬁle.

(Volume): Adjusts sound volume contained in the video ﬁle.

(Mute):

Cuts off picture and sound contained in the video ﬁle.

(Release mute): Restores picture and sound contained in the

video ﬁle.

Notes

Only one ﬁle can be sent at a time. To send another ﬁle, repeat steps

and

MPEG/AVI/ASF/WMV ﬁles can be transmitted.

The update speed of the transmitted ﬁle depends on your computer's performance and

the surrounding radio environment.

The projector ID is the MAC address of the wired LAN mounted on the projector.

The audio signals transmitted by a computer become mono.

Playing contents protected by copyright is not supported.

•

Using the Network Utility (Continued)

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TLP-X200 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info