Bedienungsanleitung Toshiba tlp xc3000 (Seite 21 von 31) (Englisch)

214612

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Operations

Notes

•You can register a logo from computer input only.

• The area that can be registered is 512 × 384 dots at the center of the screen. To

• Only one logo can be registered. When a new image is registered, the old one is

erased.

• The time needed to register or display the image varies depending on the data size.

• If you use this function on commercial video software, broadcast or cable-

broadcasting except for the purpose of your private viewing and listening, it may

infringe the copyright protected by the copyright laws.

Select the size of the registered logo.

: Displays the registered image in original size at center of the screen.

: Displays the registered image by enlarging fully in the screen.

(As processed digitally, the image quality is degraded.)

Sets background color when [Center] is selected for the logo [Display style].

You can preview the registered logo.

You can reset the registered logo, display style and background to the factory

setting. (The logo set for the start-up screen and background is reset.)

Note

• If you use the screen size setting function on commercial video software,

broadcast or cable-broadcasting programs to display images with the varying

aspect ratio except for the purpose of your private viewing and listening, it may

infringe the copyright protected by the copyright laws.

[Up/down shift]

Shifts the projected image vertically when [Screen size] is [Wide].

[Blackboard mode]

Projects the image in colors more like projecting on a screen.

Precaution

• The projected image may differ depending on the type, color, and material of the

blackboard and wall even if the selected color is the same as the projected

screen.

[Background]

•TOSHIBA is set for [Logo] by factory setting.

• If user’s logo has been registered, it is displayed when [Logo] is set for

background.

[Start-up screen]

If user’s logo has been registered and this setting is [On], the logo is displayed at

start-up.

[User logo]

Registers a part of the image that is input from computer, as a stationary picture

and displays it as a logo at start-up and when no signal is input.

How to register user logo

Select [User logo] in the Display setting menu, and press the

or button.

Select <Logo registration> from the displayed menu list and

press the

button.

The registration area is displayed for confirmation. Select [OK]

or [Cancel] and press the

button.

• If the registered picture does not fall within the display area, operate the

computer to scroll the screen.

Select [Yes] to register and press the button.

Registration starts.

•A message is displayed while registration is in process.

Using the menus (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp xc3000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info