Bedienungsanleitung Toshiba tlp xd2000 portable projector (Seite 25 von 28) (Englisch)

214707

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Others

If you think something is wrong, check the followings before contacting customer service.

Please see “Trouble indications”

p.48

as well.

If This Happens Check

No power

Power goes out

during use

No picture

No audio

Picture not

displayed

correctly

Picture blurred

Part of picture

out of focus

Image is dark

Colors too light

Bad shading

Control panel

key doesn’t work

Remote control

doesn’t work

Before calling service personnel

• Is the power cord plugged in? Is it connected to the projector?

• Is the lamp cover attached properly?

p.45

• Is the ambient temperature high?

p.48

• Is the air intake or air exhaust blocked?

p.48

• Is the projector turned on? (When [Auto input search] is [Off])

p.25

• Is the mute function on?

p.29

• Is the brightness setting minimized?

p.35

• Are the connections set up correctly?

p.21

• Are all the connected devices functioning properly?

• Is the mute function on?

p.29

• Is the volume setting minimized?

p.26

• Are the connections set up correctly?

p.21

• Are all the connected devices functioning properly?

• Is the input signal supported by the projector?

p.51

p.52

• Is there something generating an abnormal video signal, for

instance the video tape?

• Is the lens dirty?

p.47

• Is the lens focus adjusted optimally?

p.26

•

Is the projection distance within the projector’s supported range?

p.20

• Is the projector’s screen placement angle tilted too far?

p.20

• Are the sharpness or sampling phase adjustments off?

p.35

• Are the brightness or contrast adjustments off?

p.35

• Is the lamp nearing the end of its service life?

p.42

• Are the color, R-level, G-level, or B-level adjustments off?

p.35

• Is the screen dirty?

• Is the blackboard mode set properly?

p.37

• Is the lamp nearing the end of its service life?

p.42

• Is the key lock function on?

p.41

• Are the remote control’s batteries drained?

• Are the batteries inserted into the remote control correctly?

p.19

• Is the remote control being used within the effective range?

p.19

•

Are there any obstructions between the remote control and projector?

• Are there any fluorescent or other bright lights shining at the

projector’s infrared remote sensor?

The indicator lights to inform you of internal abnormalities.

No power

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

Lamp went out during use, or won’t come on

⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of the

lamp has ended or the projector is malfunctioning.

• Unplug the power cord and wait for a short while, then turn the power

back on.

• If a lamp burns out, replace it with a new one.

❈ The abnormal display will not disappear until the power cord is

unplugged.

You can not turn on the power during abnormal display.

Power went out during use

⇒ Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not blocked.

• Unplug the power cord and wait for a short while, then turn the power

back on.

❈ The

icon will appear before the power goes out.

❈ The abnormal display will not disappear until the power cord is

unplugged.

You can not turn on the power during abnormal display.

Power went out during use

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ The abnormal display will not disappear until the power cord is

unplugged.

You can not turn on the power during abnormal display.

Power went out during use, or power won’t come on

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

p.45

❈ The abnormal display will not disappear until the power cord is

unplugged.

You can not turn on the power during abnormal display.

Power went out during use

⇒ Problem inside the projector.

• Unplug the power cord and wait for a short while, then turn the power

back on.

• If the above action will not clear the problem, unplug the power cord,

and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ The abnormal display will not disappear until the power cord is

unplugged.

You can not turn on the power during abnormal display.

(Off)

(Red

flashing)

(Red lit)

(Red lit)(Red lit)

(Red

flashin

)

(Red lit)

(Green

flashin

)

(Red lit)

(Orange

flashin

)

(Red lit)

(Red lit) (Orange

lit)

Trouble indications

Others

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp xd2000 portable projector Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info