Bedienungsanleitung Toshiba VTW2886 (Seite 26 von 64) (Englisch)

617361

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Press or to select

PDC ON or OFF. When you

have finished setting all your

recordings, press ENTER.

To set the timer for another

programme, press

or to

select another programme line, then press ENTER.

Repeat steps 3 to 5 to set the second programme.

PDC stands for Programme Delivery Control system. A

PDC signal is broadcast at the beginning and end of

most TV programmes. This lets your unit know if a TV

programme is running early or late.

PDC is default OFF on this unit. If you switch PDC ON

then a recording will not start until your unit receives the

PDC signal. Without PDC your recording would have

started and ended as programmed time.

EXIT

SET

SELECT

: MENU

OK : ENTER

TIMER REC SET

DATE

START

END

SPEED

23 SAT

PDC OFF

13: 00

14: 30

EXIT

SET

SELECT

: MENU

OK : ENTER

TIMER REC SET

DATE

START

END

SPEED

23 SAT

PDC OFF

13: 00

14: 30

TIMER REC SET

DATE

START

END

SPEED

23 SAT

– –

PDC OFF

– –

11: 30

EXIT

SET

SELECT

: MENU

:/ 0

TIMER RECORDING

Press TV/VCR to select TV/VCR mode.

Press MENU/SETUP.

Timer recording can be programmed

on screen with the remote control.

The built-in timer allows automatic

unattended recording of up to 8

programmes within 1 month.

Check that the TIMER REC

SET option is selected, then

press ENTER.

Press

or to select one of

the program line, then press

ENTER.

Press or to select the

desired date or every day or

every week setting (See next

page.), then press .

Preparation

• Load a cassette tape with the erase prevention tab intact.

The unit will automatically turn on.

• Make sure that the clock shows the present time correctly.

Set the start time, end time,

channel and tape speed as in

step 3.

Example:

Programme a timer recording for 13:00-14:30, channel 3

(Tape speed : LP).

Press TIMER REC. The REC indicator will light. The

Timer is programmed, when the programmed time is

reached, the recording is automatically started.

NOTES:

• If programming is performed without a

tape in the unit, or with a tape without

an erase prevention tab, the Timer

Recording is not possible. If a tape

without an erase prevention tab is in

the unit, the tape will be ejected.

•To record from external equipment

connected via the SCART socket

(AV1) or the front AV socket (AV2),

press

or repeatedly until "AV1"

or "AV2" appears when setting the

channel in step 4.

• The VCR section cannot be used

while the REC indicator is lit. If

you want to use the VCR operation,

press TIMER REC to deactivate the

timer.

• If there is a power failure, the power

plug is disconnected, or the MAIN

POWER (ON) Switch is switched off

for more than approx. 30 mins, all

programmed timer recordings and

clock settings will be lost. In this case,

reset the clock (see page 11) and

reprogram any timer recordings.

• If you want to correct the digits while

setting, press

until the item you

want to correct flashes, then press

or to correct the desired setting.

To cancel timer recording, press the buttons

again and REC indicator will go out.

5N50201B [E] P14-24 6/28/04, 11:05 AM24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba VTW2886 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info