465054
12
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
12
Connections
About HDMI
HDMI (High Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in
one specification. HDCP is used to protect digital content
transmitted and received by DVI-compliant or HDMI-compliant
displays.
HDMI has the capability to support standard, enhanced, or high-
definition video plus standard to multi-channel surround-sound
audio. HDMI features included uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV) signals, one
connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.
Switching the output signal (interlaced / progressive)
using the remote control
You can temporarily switch the output signal for better picture quality.
Press PROGRESSIVE button repeatedly on the remote control to
select Video Output to P-Scan mode during stop.
If your TV does not support the progressive scan format, the picture
will appear scrambled or blank. To return to normal picture, press
PROGRESSIVE button repeatedly to turn off progressive mode.
Make the following setting.
On-screen display
Select:
Page
Notes
Refer to the owner’s manual of the connected equipment as well.
When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player away from
the tuner and radio.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, high volume sound may damage your hearing as well as the speakers.
Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may
be damaged.
Analog audio out will not have sound if DTS playback is selected.
ColorStream
®
and ColorStream Pro
®
are registered trademarks of Toshiba America Cousumer Products L.L.C.
“PCM” or
“Bitstream”
“Digital Output”
Component
*P-Scan
(Progressive)
“Video Output”
* Only for TV equipped with component video
input jacks which support the progressive scan.
31
32
480p, 720p, 1080i,1080p and 1080p/24F are signals created with
this DVD Player from original 480i signal. The resolution of the
picture may not be increased even if they are selected.
480p and 720p cannot be selected when the picture mode is sharp,
color or contrast
23
.
illuminates “1080i”
1080i (interlaced)
illuminates “720p” 720p (progressive)
illuminates “480p” 480p (progressive)
Press
Press
Press
Make the following setting.
On-screen display
Select:
Page
“PCM”
“Digital Output”
HDMI
“Video Output”
(not supplied)
HDMI-compatible
display
HDMI Cable
To HDMI
Output
Available output signals are below:
Auto
480p (progressive)
720p (progressive)
1080i (interlaced)
1080p (progressive)
1080p/24F (progressive)
Switching the video quality (HDMI mode) using HDMI
button on the remote control.
Press HDMI button on the remote control to receive a suitable
video quality in STOP mode. The video quality is required to match
your TV having HDMI feature and suitable quality. Please also check
your TV owner’s manual. Press this button to change the output
signals as below. See the HDMI indicator and select the appropriate
output signal.
illuminates “ 1080p”
1080p (progressive)
31
32
Connecting to a display (Using a HDMI
TM
cable)
Press
illuminates “480p, 720p,
1080i, 1080p, 24F”
Auto
Press
HDMI indicator Video output signal
illuminates “ 1080p, 24F” 1080p/24F (progressive)
Press
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba XD-E500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info