Bedienungsanleitung Tosot Moma 19 (Seite 48 von 53) (Englisch)

730454

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

Aptitude requirement for maintenance man(repairs should be done only

be specialists).

a. All the work men who are engaging in the refrigeration system should bear the

valid certification awarded by the authoritative organization and the qualification for

dealing with the refrigeration system recognized by this industry.

b. It can only be repaired by the method suggested by the equipment’s manufacturer.

If it needs other technician to maintain and repair the appliance, they should be

supervised by the person who bears the qualification for using the flammable refrigerant.

Safety preparation work before installation

The safety must be inspected before maintaining the appliances with the flammable

refrigerant for reducing the flammable hazard to the lowest.

Work shall be undertaken under a controlled procedure so as to minimise the risk of a

flammable gas or vapour being present while the work is being performed.

Environment checking

Detection of flammable refrigerants

All maintenance staff and others working in the local area shall be instructed on the

nature of work being carried out. Work in confined spaces shall be avoided. The area

around the workspace shall be sectioned off. Ensure that the conditions within the area

have been made safe by control of flammable material.

The area shall be checked with an appropriate refrigerant detector prior to and during

work, to ensure the technician is aware of potentially toxic or flammable atmospheres.

Ensure that the leak detection equipment being used is suitable for use with all applicable

refrigerants, i.e. non-sparking, adequately sealed or intrinsically safe.

No person carrying out work in relation to a refrigeration system which involves

exposing any pipe work shall use any sources of ignition in such a manner that it may lead

to the risk of fire or explosion. All possible ignition sources, including cigarette smoking,

should be kept sufficiently far away from the site of installation, repairing, removing and

disposal, during which refrigerant can possibly be released to the surrounding space.

Prior to work taking place, the area around the equipment is to be surveyed to make sure

that there are no flammable hazards or ignition risks. “No Smoking” signs shall be displayed.

If any hot work is to be conducted on the refrigeration equipment or any associated

parts, appropriate fire extinguishing equipment shall be available to hand. Have a dry

powder or CO

2 fire extinguisher adjacent to the charging area.

Ensure that the area is in the open or that it is adequately ventilated before breaking

into the system or conducting any hot work. A degree of ventilation shall continue during

the period that the work is carried out. The ventilation should safely disperse any released

refrigerant and preferably expel it externally into the atmosphere.

Under no circumstances shall potential sources of ignition be used in the searching

for or detection of refrigerant leaks. A halide torch (or any other detector using a naked flame)

shall not be used.

Specialist’s Manual



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tosot Moma 19 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info