Bedienungsanleitung Tower T16001 (Seite 8 von 28) (Englisch)

671075

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

3 USING YOUR APPLIANCE

Beforerstuse:

1. Remove the parts from the packaging.

2. Place the multi cooker on a at, dry

surface.

3. Remove any promotional labels or stickers.

4. Remove the cooking pot and the glass lid.

5. Wash in hot soapy, water with a mild

household detergent.

6. Rinse and dry thoroughly.

7. Do not use harsh abrasives or chemicals.

8. Dispose of the packaging in a responsible

manner.

9. Your appliance is now ready for normal

use.

Functionality

1. Connect the power lead to the cooking

pot, and plug into a power outlet.

2. Continually press the menu button on

the control panel to select the required

cooking function.

3. This will display the cooking time for

this function, if you wish to increase or

decrease this time, you can do this by

pressing the pre-set or cancel button on

the control panel to change the cooking

time by a minute at a time.

4. Once the required function has been

selected, press the start/cancel button

and the process will start.’

5. If the function you are using has the

adjust temperature feature (listed in the

programme guide on page 23) you can

now adjust the temperature to what you

require by pressing the temperature button

on the control panel.

6. To stop cooking at any time press the

cancel button, this will place the cooker

into the stand-by mode.

Cookingwithadelayedstart-Pre-set

CookingTime

For Soup, Pilaf Rice, Porridge and Rice only

Press the menu button and select soup,

porridge, rice or pilaf rice. Press the pre-set

button which will lead to the time entry function.

Press the time button to increase and the

temperature button to decrease the timer in 10

minute increments respectively. The pre-set

light and the cooking function light will both

illuminate. Once the pre-set cooking time has

elapsed, the cooking function will begin.

Keep Warm

After the cooking process has nished the

cooker will automatically go into the Keep

Warm setting. The Multi-Function cooker will

enter the Keep Warm setting automatically

for all functions apart from the steam & pasta

functions.

Whilst on the Keep Warm Setting the cooker

will stay between 65-70°C, if the temperature

rises above 70°C, the cooker will stop heating

until the temperature falls within the normal

range again. If the temperature falls below 65°C

it will start to heat back up to 70°C.

CookingRice

1. Measure out your required amount of rice

using the measuring cups provided, then

wash your rice under cold water.

2. Place washed rice into the cooking

pot and place the required amount of

water into the cooking pot, following the

measuring guide inside the cooking pot.

3. Place the lid on top.

4. If you are using the Pre-set function to

set your rice to begin cooking at a later

time, press the pre-set button rst and set

the required time before starting the Rice

function.

5. Now press your menu button and select

the rice function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tower T16001 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info