Bedienungsanleitung Toyotomi FF 95 - Type C (Seite 8 von 18) (Deutsch, Englisch, Holländisch, Französisch)

728837

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

ENGLISH

WEEKLY TIMER OPERATION

1. Set the Weekly Timer

After setting the current time and a day of the week, press the “TIMER” button to enter the weekly timer setting

mode. The “TIMER” is shown on the display. When the “TIMER” button is pressed during setting of the weekly

timer, the “TIMER” sign is disappeared and the current clock time is shown on the display.

NOTE: You cannot enter the weekly timer setting mode, while in operation at AUTO operation mode.

1) Select the program number

1. Press the “

▲

MIN.” button or the “

▼

HOUR” button to select the program number.

The number of the program is 30. The unsetting program number is ﬂashing on the display. In the case of

the ﬁrst setting of the weekly timer, “P01” is shown on the display and will ﬂash. All of a day of the week

will also ﬂash.

NOTE: When pressing the “

▲

MIN.” button at the position of “P30”, you can hear the beep sound and “P30”

is not changed any more.

When pressing the “

▼

HOUR” button at the position of “P01”, you can hear the beep sound and

“P01” is not changed any more.

After the program is set, the next setting program number is shown on the display. If the program

is set until “P30”, “P30” is shown on the display. Even though the program is set until “P30”, if there

is the unsetting program number, the smallest unsetting program number is shown on the display.

Example:

When “P01” and “P02” programs are already set and “P03” is not set yet, the display is indicated as

follows.

“P01” – lighting

⇔

“P02” – lighting

⇔

“P03” – ﬂashing

When “P01” and “P04” programs are already set and “P02” and “P03” are not set yet, the display is

indicated as follows.

“P01” – lighting

⇔

“P02” – ﬂashing

⇔

“P03” – ﬂashing

⇔

“P04” – lighting

2. Press the “SET” button to move to the next step (2) Set the timer).

The program number is eliminated by holding the “CLEAR” button continuously for 3 seconds.

2) Set the timer

1. Press the “

▲

MIN.” button or the “

▼

HOUR” button to set timer.

2. Press the “SET” button to complete the set of timer and to move to the next step (3) Set ON/OFF of

weeklytimer).

NOTE: When “SET” button is pressed when showing the bars sign on the display, you can hear the beep

sound and cannot move to the next step.

3) Set ON/OFF of weekly timer

and all of a day of the week will ﬂash on the display.

Press the “

▲

MIN” button or the “

▼

HOUR” button to select

OFF

2. Press “SET” to complete the set ON/OFF of weekly timer.

When you set ON, the next step is 4) Set the temperature set of the program.

When you set OFF, the next step is 5) Set a day of the week of the program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toyotomi FF 95 - Type C Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info