Bedienungsanleitung Toyotomi Noboru NTN-NTG-935R32 (Seite 5 von 138) (Englisch, Italienisch, Spanisch)

728853

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

5GB



If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons to avoid a hazard.



The temperature of refrigerant circuit will be high, please keep the

interconnection cable away from the copper tube.



The appliance shall be installed in accordance with national wiring

regulations.



Installation must be performed in accordance with applicable local

regulations by authorized licensed personnel only.



The air conditioner is the first-class electric appliance. It must be properly

grounding with specialized grounding device by a professional. Please

make sure it is always grounded effectively, otherwise it may cause electric

shock.



The yellow-green wire in air conditioner is grounding wire, which can't be

used for other purposes.



The grounding resistance should comply with national electric safety

regulations.



The appliance must be positioned so that the plug is accessible.



All wires of indoor unit and outdoor unit should be connected by a

professional.



If the length of power connection wire is insufficient, please contact the

supplier for a new one. Avoid extending the wire by yourself.



For the air conditioner with plug ，the plug should be reachable after

finishing installation.



For the air conditioner without plug, a circuit break must be installed in the

line.



If you need to relocate the air conditioner to another place, only the

qualified person can perform the work. Otherwise, it may cause personal

injury or damage.



Select a location which is out of reach for children and far away from

animals or plants. If it is unavoidable, please add the fence for safety

purpose.



The indoor unit should be installed close to the wall.



Instructions for installation and use of this product are provided by the

manufacturer.



The air conditioner is not allowed to use in a room that has running fire

(such as fire source, working coal gas ware, operating heater).



It is not allowed to drill hole or burn the connection pipe. These tasks shall

only be done by a licensed technician to ensure your safety.



Leak test is a must after installation.



Don’t install the air conditioner in a place where there is flammable gas or

liquid. It may cause fire even explosion.

This product contains fluorinated greenhouse gases



Do not repair air conditioner by yourself. It may cause electric shock or

damage. Please contact dealer when you need to repair air conditioner.



Do not extend fingers or objects into air inlet or air outlet. It may cause

personal injury or damage.



Do not block air outlet or air inlet. It may cause malfunction.



Do not spill water on the remote controller, otherwise the remote controller

may be broken.



When below phenomenon occurs, please turn off air conditioner and

disconnect power immediately and then contact the dealer or qualified

professionals for service.

 Power cord is overheating or damaged.

 There’s abnormal sound during operation.

 Circuit break trips off frequently.

 Air conditioner gives off burning smell.

 Indoor unit is leaking.



If the air conditioner operates under abnormal conditions, it may cause

malfunction, electric shock or fire hazard.



When turning on or turning off the unit by emergency operation switch,

please press this switch with an insulating object other than metal.



Do not step on top panel of outdoor unit or put heavy objects. It may cause

damage or personal injury.



Installation must be performed by qualified professionals. Otherwise, it may

cause personal injury or damage.



Must follow the electric safety regulations when installing the unit.



According to the local safety regulations, use qualified power supply circuit

and circuit break.



Install the circuit break. If not, it may cause malfunction.



An all-pole disconnection switch having a contact separation of at least

3mm in all poles should be connected in fixed wiring.



Including a circuit break with suitable capacity, please note the following

table. Air switch should be included magnet buckle and heating buckle

function, it can protect the circuit-short and overload.



Air Conditioner should be properly grounded. Incorrect grounding may

cause electric shock.



Don't use unqualified power cord.



Make sure the power supply matches with the requirement of air

conditioner. Unstable power supply or incorrect wiring or malfunction.

Please install proper power supply cables before using the air conditioner.



Properly connect the live wire, neutral wire and grounding wire of power

socket.



Be sure to cut off the power supply before proceeding any work related to

electricity and safety.



Do not put through the power before finishing installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toyotomi Noboru NTN-NTG-935R32 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info