Bedienungsanleitung TP-LINK AP500 (Seite 1 von 2) (Englisch)

664748

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

AP300 / AP500

11AC Wireless Gigabit Access Point

Quick

Installation Guide

Before your start

AP Mode (Default)

The AP device transforms your wired network into wireless.

Repeater/Bridge Mode

The AP device extends the range of an existing Wi-Fi network.

Configure the AP Device

Note: AP500 is used for demonstration in this installation guide.

Host AP

A B

Internet

Operating Modes

AP Mode (Default Mode)

Repeater/Bridge Mode

Client Mode

Scenarios

You are in a Wi-Fi dead-zone or a place with weak wireless

signal. You want to have a greater effective range of the

wireless signal throughout your home or office.

You want to convert your wired (Ethernet) network to a

wireless network.

You have a wired device with an Ethernet port and no wireless

capability, for example, a Smart TV, Media Player, or game

console. You want to connect it to the Internet wirelessly.

1. Connect the AP device according to steps A to D in the diagram.

2. Turn on the power and wait until the Power ( ) and Wireless ( & ) LEDs are lit and

stable, use the default SSID and Password printed on the product label to join the AP

device’s Wi-Fi network.

3. Launch a web browser and enter http://tplinkap.net, then log in using admin (all

lowercase) for both Username and Password.

Note: You can enjoy the Internet surfing now. For your wireless network security, it is recommended to change the

default SSID (network name) and the password of your Wi-Fi network. To do so, perform the following steps.

1. Connect the AP device according to steps A and B in the diagram.

2. Turn on the power and wait until the Power ( ) and Wireless ( & ) LEDs are lit and

stable, use the default SSID and Password printed on the product label to join the AP

device’s Wi-Fi network.

3. Launch a web browser and enter http://tplinkap.net, then log in using admin (all lowercase)

for both Username and Password.

4. Click Quick Setup, then select your Region and click Next.

Now, connect your wireless devices to the Wi-Fi network using the AP device’s SSID and

password.

5. Select Repeater/Bridge mode and click Next. Follow the step-by-step on-screen

instructions to complete the configuration.

6. Relocate the AP device to a good place. For details, you can refer to Q5 in Frequently

Asked Questions (FAQ).

Enjoy!

Now, reconnect your wireless devices to the new Wi-Fi network.

4. Click Quick Setup, then select your Region and click Next.

5. Select Access Point mode and click Next to customize your Wi-Fi settings. Follow

the step-by-step on-screen instructions to complete the configuration.

Which mode do you need? Please refer to the table to choose a proper mode.

Host AP’s SSID AP500’s SSID

Wired Router

Internet

AP500’s SSID

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK AP500 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK AP500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info