Bedienungsanleitung TP-LINK Archer A7 (Seite 2 von 2) (Englisch)

684282

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

For technical support, the user guide and other information, please

visit https://www.tp-link.com/support, or simply scan the QR code.

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

Method 1: Via TP-Link Tether App

1. Download the Tether app.

2. Connect your smartphone to the router.

3. Connect the router to the internet.

The default wireless network

names (SSIDs) and password

are printed on the label at the

bottom of the router.

a Launch the Tether app. Select your model

from the local device list.

b Create a password to log in.

c Follow the step-by-step instructions to

set up the internet connection and

Scan for Tether Tether

Device

Local Device

Archer XXXX

50-C7-BF-02-EA-DC

Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1

in the address bar. Create a password to log in.

Follow the step-by-step instructions to set up the internet connection and

2. Connect the router to the internet.

http://tplinkwifi.net

Let’s Get Started

Confirm Password

Password

Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide.

Method 2: Via a Web Browser

Wired

Turn off the Wi-Fi on your computer and connect to the router using an

Ethernet cable.

1. Connect your device to the router (wired or wireless).

Wireless

Find the SSID and wireless password printed on the label of the router.

Click the network icon of your computer or go to Wi-Fi settings of

your smart device, and then select the SSID to join the network.

Need Help?

Q1. What should I do if I cannot access the web management page?

If the computer is set to a static IP address, change its settings to obtain an IP

address automatically.

Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively,

enter http://192.168.0.1 or http://192.168.1.1 in the web browser and press Enter.

Use another web browser and try again.

Reboot your router and try again.

Disable and enable the network adapter being used.

Q2. What should I do if I cannot access the internet?

Check if the internet is working normally by connecting a computer directly to the

modem using an Ethernet cable. If it is not, contact your internet service provider.

Map page to check whether the internet IP address is valid or not. If it is not, check

the hardware connection or contact your internet service provider.

Reboot your router and try again.

For cable modem users, log in to the web management page of the router. Go to

Advanced > Network > Internet > MAC Clone, click Use Current Computer MAC

Address and click Save. Then reboot both the modem and the router.

Q3. How do I restore the router to its factory default settings?

With the router powered on, use a pin to press and hold the Reset button on the

back until the Power LED blinks.

Tools > Backup & Restore, and click Factory Restore. The router will restore and

reboot automatically.

Q4. What should I do if I forget my web management page password?

If you are using a TP-Link ID to log in, click Forgot password on the login page and

then follow the instructions to reset it.

Alternatively, press and hold the Reset button on the back of the router until the

Power LED blinks to reset it, then visit http://tplinkwi.net to create a new login

password.

Q5. What should I do if I forget my wireless network password?

If you have not changed the default wireless password, it can be found on the

label at the bottom of the router.

Connect a computer directly to the router using an Ethernet cable. Log in to the

router’s web management page at http://tplinkwi.net, and go to Basic >

Wireless to retrieve or reset your wireless password.

Safety Information

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Do not use the device where wireless devices are not allowed.

Adapter shall be installed near the equipment and shall be easily accessible.

Access Point Mode

Existing Router

Ethernet4Ethernet3Ethernet1Ethernet2Internet

Ethernet4

Ethernet

Internet

New Router

Internet

Clients

If you already have a router, you can switch this new router to Access Point

mode to extend your existing network. Follow the steps below.

1. Power on the router.

2. Connect the router’s Internet port to your existing router’s Ethernet port

via an Ethernet cable as shown above.

3. Connect a computer to the router via an Ethernet cable or wirelessly by

using the SSID (network name) and Wireless Password printed on the

label at the bottom of the router.

4. Launch a web browser, and enter http://tplinkwifi.net in the address bar.

Create a password to log in.

5. Go to Advanced

Operation Mode, select Access Point and click Save.

6. Wait for the router to reboot, then log in and follow the Quick Setup to

complete the setup.

Change the Router’s Settings

After setup, you can change the router’s settings via the intuitive Tether app,

or via a web browser as shown below.

1. Connect your device to the router via an Ethernet cable or

wirelessly.

2. Launch a web browser, enter http://tplinkwifi.net in the address

bar, and log in.

Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide.

3. Change the router’s settings as needed.

To change: Go to:

Wireless network name

and password

Basic > Wireless

Basic > TP-Link Cloud

(if you log in via TP-Link ID)

management page

Advanced > System Tools > Administration

(if you log in via router’s password)

Set Up the Network 2

TP-LINK Archer A7 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK Archer A7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info