Bedienungsanleitung TP-LINK Archer AX11000 (Seite 2 von 2) (Englisch)

714436

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Need Help?

Q1. What should I do if I can’t access the web

management page?

Reboot your router and try again.

If the computer is set to a static IP, change its settings to

obtain an IP address automatically.

Verify that http://tplinkwifi.net is correctly entered in the web

browser. Alternatively, enter http://192.168.0.1 or

http://192.168.1.1 in the web browser.

Use another web browser and try again.

Disable and enable the network adapter in use.

Q2. What should I do if I can’t access the internet?

Reboot your modem and router, then try again.

Check if the internet is working normally by connecting a

computer directly to the modem via an Ethernet cable. If it is

not, contact your internet service provider.

Advanced > Network > Status to check whether the internet

IP address is valid or not. If it is, please run the Quick Setup

again; otherwise, check the hardware connection.

For cable modem users, log in to the web management page

of the router and go to Advanced > Network > Internet > MAC

Clone. Select Clone Current Device MAC and click SAVE.

Then reboot both the modem and the router.

Q3. What should I do if the router can’t be found via

Bluetooth in Tether (how to reset the router)?

The router's Bluetooth will be enabled for 30 minutes following a

reset to factory defaults. There are two ways to reset the router:

With the router powered on, use a pin to press and hold the

Reset button on the back of the router until the LED blinks.

Advanced > System > Backup & Restore, and click FACTORY

RESTORE. The router will reset and restart automatically.

LED & Button Explanation

Pulsing Orange

The system is starting up.

Solid Orange

The router is connected to the

internet, but the Wi-Fi is o.

Solid White

The router is working normally.

Solid Red

No internet connection.

Pulsing White

The rmware is being upgraded,

WPS connection is being established

or the router is being reset.

Wi-Fi Button

Press the Wi-Fi button to turn on or o

the wireless function of your router.

WPS Button

Press the WPS button, and

immediately press the WPS button on

your client to start the WPS process.

LED Button

Press the LED button to turn on or o

the LED of your router.

For technical support, replacement services, the user guide and

more information, please visit https://www.tp-link.com/support

If you have any suggestions or needs for our product guides, you

are welcome to email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, visit

https://community.tp-link.com to join the TP-Link Community.

· Keep the device away from water, re, humidity or hot environments.

· Do not attempt to disassemble, repair, or modify the device.

· Do not use any other chargers than those recommended.

· Do not use damaged charger or USB cable to charge the device.

· Do not use the device where wireless devices are not allowed.

· Adapter shall be installed near the equipment and shall be easily accessible.

Quick Installation Guide

Next-Gen Tri-Band Gaming Router

AX11000

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK Archer AX11000 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK Archer AX11000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info