Bedienungsanleitung TP-LINK Archer AX90 (Seite 2 von 2) (Englisch)

727873

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

New Password:

Let’s Get Started

Conrm Password:

http://tplinkwi.net

Method ONE: Via TP-Link Tether App

1. Download the Tether app.

Scan for Tether

Tether

Choose your device type

Archer AX11000

Archer C5400X

Range Extender

Router

Archer AX6000

Method TWO: Via a Web Browser

2. Open the Tether app and log in with your

TP-Link ID.

3. Tap the button in the Tether app and

select Router > Wireless Router. Follow

the steps to complete the setup and

connect to the internet.

Note: If you don’t have an account, create one first.

Set Up the Network

The default wireless network names (SSIDs) and password

are printed on the label at the bottom of the router.

1. Connect your device to the router wirelessly

or with an Ethernet cable.

Model: Archer AX3000

AX3000 Gigabit Wi-Fi Router

Wireless Password/PIN:XXXXXXXX

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G_1

SSID:TP-Link_XXXX_5G_2

2. Launch a web browser, and enter

http://tplinkwifi.net or http://192.168.0.1 in

the address bar. Create a password to log in.

Note: If the login window does not appear, please refer to

Q2 of Need Help? in this guide.

3. Follow the step-by-step instructions to

set up the internet connection and

Q1. What should I do if I want to use 1 Gbps WAN/LAN port for internet service?

• Connect to the 1 Gbps WAN/LAN port with an Ethernet cable. During the quick network

setup, select the 1 Gbps WAN/LAN port as the Internet port. Or after the network setup, you

can go to Tools > Internet Connection > Internet Port (Tether app) or Internet > Internet

Port (web management page) to change it.

Q2. What should I do if I can’t access the web management page?

• Reboot your router and try again.

• If the computer is set to a static IP, change its settings to obtain an IP address automatically.

• Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter

http://192.168.0.1 or http://192.168.1.1 in the web browser.

• Use another web browser and try again.

• Disable and enable the network adapter in use.

Q3. What should I do if I can’t access the internet?

• Log in to the web management page of the router, go to Internet > Internet Port, and check

if you selected the port that you've already plugged your Ethernet cable into.

• Reboot your modem and router, then try again.

• Check if the internet is working normally by connecting a computer directly to the modem

via an Ethernet cable. If it is not, contact your internet service provider.

• Log in to the web management page of the router, and go to the Network Map page to

check whether the internet IP address is valid or not. If it is, go to Advanced > Quick Setup

to set up again; otherwise, check the hardware connection.

• For cable modem users, log in to the web management page of the router and go to

Advanced > Network > Internet > MAC Clone. Select Clone Current Device MAC and click

Save. Then reboot both the modem and the router.

Q4. What should I do if I forget my wireless password?

•

If you have not changed the default wireless password, it can be found on the label at the

bottom of the router.

•

Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web

management page at http://tplinkwi.net, and go to the Wireless page to retrieve or reset your

wireless password

Q5. What should I do if I forget my web management page password?

• If you are using a TP-Link ID to log in, click Forgot Password? on the login page and then

follow the instructions to reset it.

• Alternatively, press and hold the Reset button until the LED blinks. Then visit

http://tplinkwifi.net to create a new login password.

Need Help?

· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

· Keep the device away from water, re, humidity or hot environments.

· Do not use any other chargers than those recommended.

· Do not use damaged charger or USB cable to charge the device.

· Do not use the device where wireless devices are not allowed.

· Adapter shall be installed near the equipment and shall be easily accessible.

For technical support, replacement services, user guides and

more, please visit https://www.tp-link.com/support

Email techwriter@tp-link.com.cn to give suggestions.

To communicate with TP-Link users or engineers, visit

https://community.tp-link.com to join TP-Link Community.

LED Explanation

Button Explanation

Button Description

Press the WPS button, and immediately press the WPS

button on your client to start the WPS process.

Press and hold the Wi-Fi button for about 2 seconds to turn

on or o the wireless function of your router.

Press the LED button to turn on or o the LED of your router.

Wi-Fi

WPS

LED

No internet connection.Solid Red

The Wi-Fi is o.Solid Orange

The Wi-Fi is o and there is no internet connection.Pulsing Red

LED Description

The system is starting up.Pulsing Orange

The router is working properly.Solid Blue

The rmware is being upgraded, WPS connection is being

established or the router is being reset.

Pulsing Blue

TP-LINK Archer AX90 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK Archer AX90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info