772801

TP-LINK Archer C5200 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Configuring the Router
Wired
Connect your computer to the router (wired or wireless).
1.
FAQ (Frequently Asked Questions)
Q1. What can I do if the login page does not appear?
A1. If the computer is set to a static or fixed IP address, change the setting to obtain an
IP address automatically.
A2. Verify that http://tplinkwifi.net is correctly entered in the web browser.
Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser
and press Enter.
A3. Use another web browser and try again.
A4. Reboot your router and try again.
A5. Disable then re-enable the network adapter being used.
Q2. What can I do if I cannot access the Internet?
A1. Check if the Internet is working properly by connecting a computer directly to the
modem using an Ethernet cable. If it is not, contact your Internet Service Provider.
A2. Log in to the Web Management page of the router, and go to the Basic > Network
Map page to check whether the Internet IP address is valid or not. If it is, please
run the Quick Setup again; otherwise, recheck the hardware connection.
A3. For cable modem users, log in to the Web Management page of the router. Go to
Advanced > Network > Internet > MAC Clone, click Use Current Computer MAC
Address and click Save, then reboot both the modem and the router.
A4. Reboot your router and try again.
Q3. How do I restore the router to its factory default settings?
A1. While the router is powered on, press and hold the Reset button on the back for
about 7 seconds until all LEDs go off, then release the button.
A2. Log in to the Web Management page of the router. Go to Advanced > System
Tools > Backup & Restore > Facroty Default Restore, and click Factory Restore. The
router will restore and reboot automatically.
Q4. What can I do if I forgot my web management password?
A1. If you have enabled the Password Recovery function of the router, click Forgot
password? on the login page and then follow the instructions to reset the
username and password to admin.
A2. Otherwise, Refer to FAQ > Q3 to reset the router, and then use the default admin
(all lowercase) for both username and password to log in.
Note: For more information about Password Recovery feature, please refer to the User Guide at www.tp-link.com
Q5. What can I do if I forgot my wireless network password?
A1. The factory default Wireless Password/PIN is printed on the product label of the
router.
A2. Log in to the router’s Web Management page, and go to Basic > Wireless to obtain
or reset your wireless password.
To learn more about the USB features, visit
http://tp-link.com/app/usb, or simply scan the QR code.
USB Features
Use the USB ports for media sharing, storage sharing and printer sharing across
your local network. You can also set up an FTP server to access your files remotely
through the Internet.
Remote Access
via FTP Server Media Sharing Local Storage
Sharing Printer Sharing
USB 2.0 Port USB 3.0 Port
Ethernet cable
Connect wirelessly by using the SSIDs (network names) and Wireless Password
printed on the product label at the bottom of the router.
Wireless
Turn off the Wi-Fi on your computer and connect the devices as shown below.
©2015 TP-LINK
Configure the router via a web browser.
2.
Enter http://tplinkwifi.net or http://192.168.0.1 in the address bar of a web
browser. Use admin for both username and password, and click Login.
Note: If the login page does not appear, please refer to FAQ > Q1.
A
Login
●●●●●
admin
http://tplinkwifi.net
Create a new username and password and click Confirm, then follow the Quick
Setup to complete the initial configuration.
B
Tips during configuration:
When selecting your Internet Connection Type, click Auto Detect if you are unsure of
what your connection type is.
Next
Auto Detect
Dynamic IP
Static IP
PPPoE
L2TP
PPTP
Back
Internet Connection Type Wireless Settings Test Internet Connection
Region and Time Zone Summary
TP-LINK Tether App
TP-LINK Tether app lets you conveniently access the router and:
How to begin?
1. Download the TP-LINK Tether app from the Apple App Store or Google Play.
2. Ensure your device is wirelessly connected to the router.
3. Launch the Tether app and start managing your router.
View information about
the clients on you network.
Block network access from
specific users or devices.
Set up parental Controls with access
time and content restrictions.
Change the basic wireless
network settings.
LED & Button Explanation
LED/Button Status Indication
Off
On
No Ethernet port is connected.
At least one Ethernet port is connected.
The router’s Internet port is connected, but the Internet
is not available.
(Internet)
(Power)
On
Flashing
Off Power is off.
System initialization complete.
System initializing or firmware upgrading is in process.
Do not disconnect or power off the router.
Off
On
The 5GHz-1 wireless is disabled.
The 5GHz-1 wireless is working properly.
(5GHz-1
Wireless)
Off
On
The 5GHz-2 wireless is disabled.
The 5GHz-2 wireless is working properly.
(5GHz-2
Wireless)
Off
On
The 2.4GHz wireless is disabled.
The 2.4GHz wireless is working properly.
(2.4GHz
Wireless)
(Ethernet)
On/O
Flashing A wireless device is trying to connect to the network
via WPS. This process may take up to 2 minutes.
Press this Wi-Fi button for about 2 seconds to turn on or off the
wireless function of your router.
Press this WPS button, and immediately press the WPS button on
your client device. The WPS LED of the router should change
from flashing to solid on, indicating successful WPS connection.
Turns On when a WPS synchronization is established
and automatically turns Off about 5 minutes later.
(WPS)
No USB device is plugged into the USB port.
The USB device is identified and ready to use.
O
On
Flashing The USB device is being identified.
(USB1/
USB2)
(Wi-Fi Button)
(WPS Button)
The router’s Internet port is not connected.
Orange On
Off
Blue On Internet is available.
Press this LED button for about 1 second to turn on or off the
LEDs of your router.
(LED Button) If your questions are not listed here, please refer to the support page at
www.tp-link.com
Scan to download
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TP-LINK Archer C5200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von TP-LINK Archer C5200

TP-LINK Archer C5200 Bedienungsanleitung - Englisch - 121 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info