664636

TP-LINK Archer VR200 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Conguring the Modem Router
FAQ (Frequently Asked Questions)
Wired
Wireless
Connect wirelessly by using the SSID (network name) and Wireless Password printed on the
product label at the back of the modem router.
Connecting your computer to the modem router (Wired
or Wireless)
Conguring the modem router via a web browser
Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a new password (1-15 characters) and click Save.
1.
2.
A
http://tplinkmodem.net
Q1. What can I do if the login page does not appear?
A1. If the computer is set to a static or fixed IP address, change it to obtain an IP address
automatically from the modem router.
A2. Verify http://tplinkmodem.net is correctly entered in the web browser and press Enter.
A3. Use another web browser and try again.
A4. Reboot your modem router and try again.
A5. Disable and enable the active network adapter.
Q2. What can I do if I cannot access the Internet?
A1. Make sure the telephone and Ethernet cables are plugged in correctly.
A2. Try to log into the web management page of the modem router using the default
address at http://tplinkmodem.net. If you can, try the following answers. If you cannot,
change your computer to obtain an IP address automatically from the modem router.
A3. Consult your ISP and make sure all the VPI/VCI (or VLAN ID), Connection Type, account
username and password are correct. If they are not, please replace them with the correct
settings and try again.
A4. Restore the modem router to its factory default settings and reconfigure the modem
router by following the instructions in this Quick Installation Guide.
A5. Please contact our Technical Support if the problem still exists.
Q3. How do I restore the modem router to its factory default
settings?
Q5. What can I do if the DSL LED does not turn solid on?
A1. Check your cables and make sure they are all plugged in correctly, including the
telephone lines and power adapter.
A2. Manually change your DSL settings. Log into the modem router’s web management page,
and go to Advanced > Network > DSL Settings. If you were in ADSL Mode, change the
DSL Modulation Type to ADSL Auto Sync-up. If you were not sure in which mode, change
to Auto Sync-up. Then click Save. You will be prompted a disconnection, and click YES to
continue.
A3. Restore your modem router to its factory default settings.
A4. Remove the DSL splitter, directly connect the modem router to the phone jack and then
reconfigure the modem router by following the instructions in this Quick Installation
Guide.
A5. Contact your ISP to verify if the DSL line is in good status.
A6. If you have tried all the suggestions above and the problem still exists, contact our
Technical Support.
Q4. What can I do if I forget my password?
Web Management page password:
Restore the modem router to its factory default settings and then set a new password using
1-15 characters.
Wireless Network password:
A1. The default Wireless Password/PIN is printed on the product label of the modem router.
A2. If the default wireless password has been changed, log into the modem router's web
management page and go to Basic > Wireless to retrieve or reset your password.
A1. With the modem router powered on,
press and hold down the RESET
button on the back panel of the
modem router for 8 seconds until all
LEDs turn back on momentarily, then
release the button.
A2. Log in to the web management page of the modem router, and go to Advanced >
System Tools > Backup & Restore, click Factory Restore and wait until the reset
process is complete.
RESET Button Press & Hold 8 seconds
Note: If the login page does not appear, please refer to FAQ->Q1.
HighMiddleLow
Save
©2015 TP-LINK
Confirm Password
New Password
USB Features
Use the USB ports for media sharing, storage sharing and printer sharing across your
local network. You can also setup an FTP server to access your files remotely through
the Internet.
To learn more about the USB features, visit
http://tp-link.com/app/usb or simply scan
the QR code.
LED Indicators
LED Status Indication
Off
(Wireless 5GHz)
On
The wireless 5GHz band is disabled.
The wireless 5GHz band is enabled.
(WPS)
On/Off
Slow Flashing
A wireless device is trying to connect to the network via WPS. This process
may take up to 2 minutes.
Turns On when a WPS synchronization is established and automatically
turns Off about five minutes later.
(LAN)
Off
On
No LAN port is connected.
At least one LAN port is connected.
(USB)
Off
On
No USB device is plugged into the USB port.
The USB device is identified and ready to use.
Flashing
The USB device is being identified.
Off
(Wireless 2.4GHz)
On
The wireless 2.4GHz band is disabled.
The wireless 2.4GHz band is enabled.
On
(DSL)
Flashing
Off
The DSL negotiation is in progress.
DSL synchronization failed.
DSL line is synchronized and ready to use.
(Internet)
Off
On
No Internet connection or the modem router is operating in Bridge mode.
Internet connection is available.
(Power)
On
Flashing
Off Power is off.
System initialization complete.
System initializing or firmware upgrading is in process. Do not
disconnect or power off the modem router.
Remote Access
via FTP Server
Printer Sharing
Local Storage
Sharing
Media Sharing
USB
United Kingdom
(GMT) Greenwich Mean Time: Dublin, Edingburgh, London, Lisbon
Region:
Time Zone:
Next
Ethernet cable
USB Ports
Select your Region and Time Zone, then click Next.
C
Enter the new password that you created and click Login.
B
Note: For subsequent logins, use your password you have created.
Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region only.
Select your ISP from the ISP List or select Other if you can’t nd your ISP, then
click Next. Follow the step-by-step instructions of the Quick Setup to complete
the initial conguration.
D
Note: For advanced settings, please refer to the User Guide on TP-LINK official website at www.tp-link.com.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TP-LINK Archer VR200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von TP-LINK Archer VR200

TP-LINK Archer VR200 Bedienungsanleitung - Englisch - 116 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info