7
1.4 Log in to OC200
To use OC200 to manage EAPs, you first need to log in to OC200. There are two situations:
·
Login in to the OC200 on the local network
·
Login in to the OC200 via Omada cloud
1.4.1 On the Local Network
Follow the steps below to enter the management interface of OC200 on the local network:
1. Make sure that your management device has the route to access the OC200.
2. Check the DHCP server (typically a router) for OC200’s IP Address. The default fallback IP of
address OC 200 is 192.168.0.253.
Tips:
The fallback IP address is used when OC200 fails to get dynamic IP address from the DHCP server
3. Launch a web browser and type OC200’s IP address in the address bar, then press Enter
(Windows) or Return (Mac).
1.4.2 Via Omada Cloud
Follow the steps below to log in to OC200 via Omada cloud:
1. Make sure that your management device and OC200 can access the internet.
2. Launch a web browser and visit https://omada.tplinkcloud.com in the address bar, then press
Enter (Windows) or Return (Mac).
3. Enter your TP-Link ID and password to log in. Then click Add Cloud Controller and follow the
instructions to add your OC200.
4. Click Launch in the Action column to visit the management interface of OC200.
1.4.3 Do the Basic Configurations
In the web browser you can see the configuration page. Follow the setup wizard to complete the
basic settings for OC200.
