Bedienungsanleitung TP-LINK RE300 - AC1200 Wi-Fi Range Extender (Seite 1 von 2) (Englisch)

727870

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Quick Installation Guide

7106508139 REV1.0.0

Power On

Set Up

Method 3: Via the WPS Button

1. Press the WPS button on your router.

The WPS button might

look like one of these:

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the

extender’s network TP-Link_Extender. If you are

using a computer, unplug the Ethernet cable if any.

Method 1: Via the Tether App

1. Get the up-to-date Tether app.

2. Connect your smartphone to the extender’s

network TP-Link_Extender.

3. Launch the Tether app, and select your extender.

Create a password to log in.

Scan for Tether Tether

Range Extender

RE300

Blinking Solid On

Note: If the LED does not turn solid on, try again or use Method 1

or 2.

2. Within 2 minutes, press the WPS button on the

extender for 1 second. The LED should change

from blinking to solid on, indicating successful

connection.

3. If the extender connects to a dual band router,

repeat steps 1 and 2 above to connect to the

other band.

Need setup videos?

Scan the QR code, or visit

https://www.tp-link.com/download/RE300.html

2. Launch a web browser, and enter

http://tplinkrepeater.net or http://192.168.0.254

in the address bar. Create a password to log in.

Note: If the login window does not appear, refer to FAQ > Q1.

http://tplinkrepeater.net

Start

Conrm Password

Create Password

Low Middle High

Extended Network Names:

Router’s network name with

_EXT

at the end

Passwords:

Same as your router

Note:

If you want to change the extended network

names, refer to Manage the Extender on the back

page.

Next to

Connections are available

Wireless Network Connection

Connect automatically Connect

√

TP-Link_Extender

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

Other...

< Settings

My Devices

Local Device

REXXX

XX-XX-XX-XX-XX-XX

4. Follow app instructions to complete the setup.

Note: If the LED does not turn solid on, refer to FAQ > Q2.

The LED should turn solid on, indicating

successful connection to your router.

Solid On

3. Follow web instructions to complete the setup.

Note: If the LED does not turn solid on, refer to FAQ > Q2.

The LED should turn solid on, indicating

successful connection to your router.

Solid On

Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns solid white. If it doesn't, relocate

the extender closer to the router to achieve better signal quality.

Router Devices

Halfway

White: Suitable location

Red: Too far from router

Enjoy the internet!

Tip: For more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location Assistant.

Solid On

If you cannot find the network names with _EXT in

your Wi-Fi network list, this means that the extender

has been connected to a OneMesh router and

automatically copied its Wi-Fi settings. See back for

more information.

Solid On

Plug the extender into a power outlet next to your router. Wait until its

Power LED turns solid on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK RE300 - AC1200 Wi-Fi Range Extender Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK RE300 - AC1200 Wi-Fi Range Extender

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info