Bedienungsanleitung TP-LINK RE300 - AC1200 Wi-Fi Range Extender (Seite 2 von 2) (Englisch)

727870

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Q1. What should I do if I cannot access the extender’s web

management page?

Make sure your computer or smartphone has connected to the extender’s

network, and not that of your router. If your router and extender share the same

network name, use the Tether app.

If you are using a computer, make sure it is set to obtain an IP address and DNS

server address automatically.

Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered

in the web browser and press Enter. Note that http://192.168.0.254 applies only

for extenders with factory default settings.

Use another web browser and try again.

Reboot or reset the extender and try again.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi passwords for your host networks during

the conguration. Check the passwords and try again.

Make sure the extender is close to your router, preferably within 16 feet, and

away from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the Reset button for 1 second.

The extender will reboot.

For technical support, the user guide and other information, please

visit https://www.tp-link.com/support, or simply scan the QR code.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use the device where wireless devices are not allowed.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device.

Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant

provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may

be found at http://www.tp-link.com/en/ce.

TP-Link OneMesh router and extenders work together to form one unied Wi-Fi

network. Walk through your home and stay connected with the fastest possible

speeds thanks to OneMesh’s seamless coverage.

OneMesh

with Seamless Roaming

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your

home for the fastest possible speeds.

Unied Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password,

access control settings and more.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the

Tether app or at your router’s web management page.

Reset

To check full list of TP-Link OneMesh devices, scan the QR code,

or visit https://www.tp-link.com/One-Mesh/compatibility.

Method 2: Via a Web Browser

Method 1: Via the Tether App

1. Connect your computer or smartphone to the extender’s network

If you are

using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and

Note: If the login window does not appear, refer to FAQ > Q1.

3. Manage the extender as needed.

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. Manage the extender as needed.

Manage the Extender

After setup, you can manage the extender via any of the methods below.

Note: If your extender and router use the same network name, Method 1 is recommended.

LED Explanation

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to the

5GHz wireless network of your host router.

5GHz On/O

The extender is connected or not connected to the

2.4GHz wireless network of your host router.

2.4GHz On/O

The extender is on or o.

The system is starting up or rmware is being upgraded.

(Power)

On/O

Blinking

The extender is connected to your router’s wireless

network and is in a suitable location.

The extender is experiencing poor signal strength. Try

relocating it closer to your router.

WPS connection is in progress.

No wireless connection is established.

(Signal)

Solid white

Solid red

Blinking

O

INTERNET

Unied OneMesh Network

SAME

Network Name & Password

for seamless roaming

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK RE300 - AC1200 Wi-Fi Range Extender Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK RE300 - AC1200 Wi-Fi Range Extender

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info