Bedienungsanleitung TP-LINK RE350 (Seite 2 von 2) (Englisch)

664743

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Using WPS is an easier way to extend your host network. You are recommended to use this method if your host

router has the WPS button. The button might look like one of these: . If not, please refer to Method ONE.

WPS

Q3. What should I do if the LED does not change to solid after completing

Method ONE?

· You may have entered the incorrect Wi-Fi password of your host network during the configuration. Please

log into the extender's web-based interface to check the password and try again.

· Reset the extender and go through the configuration again.

Q4. I have enabled a wireless MAC filter, wireless access control, or access

control list (ACL) on my host router. What should I do before configuring and

using the extender?

If you have enabled those functions of your host router, you may need to disable them first. And

then follow Method ONE or Method TWO to complete the configuration.

For details, please refer to the Troubleshooting of the User Guide on the support page at

www.tp-link.com.

The extender can be used as a wireless adapter to connect any Ethernet-only device

(such as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi network.

First, connect the extender to your router referring to Method ONE or Method TWO,

then connect the extender to your Ethernet-only device via an Ethernet cable.

Entertainment Adapter

TP-LINK Tether app provides a simple, intuitive way to access, manage your extender

using your iOS or Android devices.

1. Scan the QR code or search the keywords “TP-LINK Tether” to

download the app from the App Store or Play Store.

2. Ensure your smart device is wirelessly connected to the extender.

3. Launch the app and start managing your extended network.

Block network access

from speciﬁc devices

Turn off LEDs

at a specific time

Change the basic

extended network settings

Do initial configuration

of your extender

TP-LINK Tether App

Tether

How to

begin?

Using WPS (Wi-Fi Protected Setup)

Method TWO

Smart TV

Game Console

Desktop

Router

Both extended networks share the same SSIDs (network names) and passwords as those of your host networks.

Enjoy!

Plug the extender into an electrical outlet

near your router.

Power On

Connect

Relocate

Q1. Why doesn’t the login page appear after entering http://tplinkrepeater.net?

· If your computer is wirelessly connected, please verify that you have connected to

the extender’s

SSID

. If your computer is connected via an Ethernet cable, please verify that the connection is stable.

· Make sure your computer is set to obtain an IP address automatically.

· Use the IP address to log in to the page. The default IP is 192.168.0.254. If the extender is connected

to the host router, please go to the router’s DHCP client list to obtain the extender’s current IP address.

· Please reset the extender and try again.

If the problem still exists, please refer to the FAQs (NO.931&NO.504) at www.tp-link.com for detailed

instructions.

Q2. How do I restore the extender to its factory default settings?

· While the extender is powered on, press and hold the Reset button until all the LEDs turn on

momentarily.

Frequently Asked Questions (FAQ)

Press the WPS button on your router, and then press the button on the extender.

WPS

Press

If you are connecting the extender to a dual-band router but only or

LED is on, repeat step 1 again to connect the other band.

1. Some ISP gateways disable the WPS function by default. If the WPS connection fails, please use Method ONE.

2. For more information about using WPS on your router, please refer to the router manufacturer's user guide.

Wait until the Power LED

changes to solid blue.

Red

Too far away

Blue

Ideal location

Extended NetworkHost Network

Host Router Extender

Clients

The LED should change

from blinking to a solid state,

indicating a successful WPS

connection.

If not, please use Method ONE.

Plug the extender into an electrical outlet between your router

(Host Network) and the Wi-Fi “dead” zone. The location you

choose must be within the range of your existing host network.

Wait until the LED is lit and solid blue. If not, relocate it closer

to the router to achieve a good (or better) signal quality.

Note: The AP mode of the extender is not supported by Tether.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK RE350 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK RE350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info