Bedienungsanleitung TP-LINK RE355 (Seite 2 von 2) (Englisch)

664742

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Entertainment Adapter

The extender can be used as a wireless adapter to connect any Ethernet-only

device (such as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi

network.

First, connect the extender to your router using Option ONE or Option TWO, then

connect the extender to your Ethernet-only device via an Ethernet cable.

Connect

Press the WPS button on your router, and then press the button on the extender.

The LED should change

from blinking to a solid state,

indicating a successful WPS

connection.

If not, please use Option ONE.

WPS

If you are connecting to a dual-band router, but only or LED is

on, please repeat step to reconnect the other band.

Press

Some ISP gateways disable the WPS function by default, if the WPS method fails, please use Option ONE.

Option TWO

Please use Option ONE if your router does not support WPS.

Using WPS (Wi-Fi Protected Setup)

Both 2.4GHz and 5GHz extended networks share the same SSID (network name) and password as your host network.

Enjoy!

Plug the extender into an electrical outlet

near your router, and wait until the Power

LED is lit and solid blue.

Power On

Relocate

A1. Make sure your computer is connected to the extended network SSID or connect your

computer to the extender using an Ethernet cable.

A2. Make sure your computer is set to obtain an IP address automatically.

A3. Verify that http://tplinkrepeater.net is correctly entered in the web browser and press Enter.

Q3. What should I do if the LED does not change to solid after completing

Option ONE?

Frequently Asked Questions (FAQ)

Q4. How do I restore the extender to its factory default settings?

A. While the extender is powered on, press and hold the Reset button until all the LEDs turn on

momentarily.

Q2. What should I do when I cannot connect the extender via WPS?

A. Some dual-band routers may be trouble connecting to the extender via WPS. If you experience

connection issues, we recommend that you use the extender's web-based interface.

A1. You may have entered the incorrect Wi-Fi password of your host network during the

configuration. Please log into the extender's web-based interface to check the password and try

again.

A2. Please reset the extender and go through the configuration again.

Q1. What do I do if I cannot access the extender’s web-based interface?

Smart TV

Game Console

Desktop

Router

Choose a location away from Bluetooth devices

and other household electronics, such as cordless

phone, microwave, and baby monitor, etc., to

minimize signal interference.

Keep away from

Ideal Extender Placement

Host Network

Extended Network

Red: Too far awayBlue: Ideal location

Plug the extender into an electrical outlet about halfway between your router (Host Network) and the

Wi-Fi dead zone.

Wait until the LED is lit with a solid blue. If not, relocate the extender closer to the router to

achieve a good (or better) signal quality.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK RE355 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK RE355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info