Bedienungsanleitung TP-LINK RE450 (Seite 2 von 2) (Englisch)

605834

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

For technical support and other information, please visit

http://www.tp-link.com/support

TP-Link hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives

2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.

WPS is an easier way to extend your host network. You are recommended to use this method if your host router has a WPS button.

The button might look like one of these: . Otherwise, please refer to Method ONE.

Router Device

Quick Setup Using the WPS Buttton

Method TWO

Connect

Press the WPS button on your router, and then press the button on the extender within 2 minutes.

The LED should change from

blinking to a solid state, indicating

a successful WPS connection.

If not, please refer to Method ONE.

If you are connecting the extender to a dual-band router but only the or LED is on, repeat Step

1 to connect to the other band.

1. For more information about using WPS on your router, please refer to the router manufacturer's user guide.

2. Some ISP gateways disable the WPS function by default. If the WPS method fails, please refer to Method ONE.

Plug the extender into a power outlet

next to your router, and wait until the

POWER LED is lit and solid blue.

Power on

Both extended networks share the same wireless network names (SSIDs) and passwords as those of your host networks.

Enjoy!

Entertainment Adapter

The extender can be used as a wireless adapter to connect any Ethernet-only

device such as a Blu-ray player, game console, DVR, or smart TV to your Wi-Fi

network.

First, connect the extender to your router using Method ONE or Method TWO.

Then connect your Ethernet-only device to the extender via an Ethernet cable.

Router

Desktop

Game Console

Smart TV

Tether provides a simple, intuitive way to access and manage your extender from

your iOS or Android devices.

TP-Link Tether App

1. Download the Tether app from the Apple App Store or Google Play Store.

2. Ensure your device is wirelessly connected to the extender or to the host router.

3. Launch the app and start managing your extended network.

How to begin?

Scan to download

Tether

Block unwelcome devicesTurn on/o the LEDs

Modify wireless settingsSet up the extender

Frequently Asked Questions (FAQ)

Q3. What should I do if the LED does not become solid after completing

Method ONE?

You may have entered the incorrect Wi-Fi password for your host network during the

conguration. Please log in to the extender's web management page to check the password and

try again.

If the LED still doesn’t become solid, please reset the extender and go through the

conguration again.

Q2. How do I restore the extender to its factory default settings?

With the extender powered on, use a pin to press and hold the Reset button until all the LEDs turn

on momentarily, and then release the button.

Q1. What should I do if I cannot access the extender’s web management page?

If your computer is wirelessly connected, make sure that you have connected to the extender’s

SSID.

If your computer is connected via an Ethernet cable, please make sure that the connection is

stable.

Make sure your computer is set to obtain an IP address and DNS server address automatically.

Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered in the web

browser and press Enter.

Reset the extender and try again.

Q4. I have enabled a wireless MAC lter, wireless access control, or access

control list (ACL) on my router. What should I do before conguring the

extender?

If you have enabled those features of your host router, you may need to disable them rst, and

then follow Method ONE or Method TWO to complete the conguration.

Plug the extender into a power outlet about halfway between your

router and the Wi-Fi dead zone. The location you choose must be

within the range of your host network.

Relocate

Wait until the LED is lit and solid blue. If not, relocate it closer

to the router to achieve better signal quality.

Ideal extender Placement

Red

Too far away

Blue

Ideal location

Extended NetworkHost Network

For more instructions, please visit www.tp-link.com and refer to the extender’s User Guide.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK RE450 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK RE450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info