Bedienungsanleitung TP-LINK RE603X (Seite 2 von 2) (Englisch)

772829

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

TP-Link OneMesh router and extenders work together to form one unied Wi-Fi

network. Walk through your home and stay connected with the fastest possible

speeds thanks to OneMesh’s seamless coverage.

OneMeshTM with Seamless Roaming

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your

home for the fastest possible speeds.

Unied Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password,

access control settings and more.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the

Tether app or at your router’s web management page.

To check full list of TP-Link OneMesh devices, scan the QR code,

or visit https://www.tp-link.com/onemesh/compatibility.

LED Explanation

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to the 5GHz

wireless network of your router.

5GHz On/O

The extender is connected or not connected to the 2.4GHz

wireless network of your router.

2.4GHz On/O

The extender is on or o.

The system is starting up or rmware upgrade is in progress.

On/O

Blinking

The extender is connected to your router’s wireless

network and is in a suitable location.

The extender is receiving a weak signal. Try relocating it

closer to your router.

WPS connection is in progress.

No wireless connection is established.

(Signal)

Solid blue

Solid red

Blinking

O

(Power)

INTERNET

SAME

Network Name & Password

for seamless roaming

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network

If you are

using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and

3. View or change extender settings as needed.

Method 1: Via the Tether App

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods below.

You can reselect host network, change extended network settings and more.

Note: If your extender and router use the same network name, Method 1 is recommended.

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

Other...

< Settings

My Devices

Local Device

RExxx

XX-XX-XX-X X-X X-XX

Q1. What should I do if the Tether app cannot nd my device during

setup?

Try another method by following the steps below:

1. Connect your smartphone to the extender’s network TP-Link_Extender.

2. Launch the Tether app, and select your extender.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi password for your host router during the

conguration. Check the password and try again.

Make sure the extender is close to your router, preferably within 16 feet, and away

from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting it up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the RESET button for 1 second.

The extender will reboot.

Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, try turning o

your cellular data.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

For technical support, replacement services, user manuals and other information,

please visit https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs for our product guides, you are welcome

to email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, please join the TP-Link Community

at https://community.tp-link.com.

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please use this

product with care and operate at your own risk.

RESET

If you need more setup help, please visit

https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.

AX1500/AX1750/AX1800/AX3000 Wi-Fi 6 Range Extender Model: RE505X/RE603X/RE605X/RE705X

TP-LINK RE603X Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK RE603X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info