Bedienungsanleitung TP-LINK TL-PA4010P (Seite 3 von 16) (Englisch)

714440

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TL-PA4010P AV500 Passthrough Powerline Adapter

Chapter 1 Introduction

This device is an AV500 Passthrough Powerline Adapter which transforms your house’s existing

electrical wiring into a ubiquitous networking infrastructure. Simply plug this AV500 Passthrough

Powerline Adapter into an ordinary AC power outlet which will easily extend your Cable/xDSL

broadband connection or existing Ethernet (LAN) network to any other electrical outlet on the same

electrical circuit of a house without the need of any new cabling.

This Powerline Adapter supports up to 500Mbps data rate over the existing household power circuit.

With data rates of 500Mbps, full multimedia application can easily be supported throughout the whole

house in addition to Internet access. This Powerline Adapter uses the existing power lines installed in a

home as a path to transmit digital data, voice, audio and video between devices.

To ensure data communication’s security and multimedia applications, this Powerline Adapter support

built-in 128-bit AES encryption.

The new Powerline Adapter TL-PA4010P from TP-LINK provides extra convenience and better

performance for your home network with its integrated electrical socket and mains filer. The common

problem of wasting an electrical outlet is solved and additional terminal devices or multiple sockets can

be connected to the adapter just like to a normal wall socket. What’s more, the data transmission in the

network can be significantly improved by the integrated mains filter.With minimum setup, you can install

and use this Powerline Adapter within minutes. The adapter adds two useful functions.

1． Existing connection with a new unassociated device added via the Pair Button.

2． Reset to default setting via the tpPLC Utility or the Pair Button.



Note:

TP-LINK tpPLC Utility is provided to manage powerline devices. For detailed instructions, please refer to

the tpPLC Utility’s User Guide.

1.1 System Requirement

a) At least two AC power outlets (100–240V~, 50/60Hz) with standard home power wiring

b) A computer with the following:

 Operating System with TCP/IP installed

 Pentium III compatible processor and above

 Ethernet LAN card installed with TCP/IP protocol

 64 MB RAM or more

 50 MB of free disk space (Minimum)

1.2 Important Safety Instructions

1. Do not open this product or attempt to service it; it may expose you to dangerous high voltage or

other risks.

2. Do not operate this product near water.

3. Do not place or operate this product near a radiator or a heat register.

4. Do not expose this product to dampness, dust or corrosive liquids.

5. Do not connect this product or disconnect it from a wall socket during a lightning or a thunderstorm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK TL-PA4010P Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK TL-PA4010P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info