Bedienungsanleitung TP-LINK TL-SC3230N (Seite 73 von 94) (Englisch)

605847

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

z Check the bandwidth of Internet connection. If the Internet

bandwidth is lower than target bit rate, the video streaming will

not work correctly.

The unreadable

characters are displayed.

Use the operating system of the selected language. Set the

Encoding or the Character Set of the selected language on the

Internet Explorer.

Frame rate is slower than

the setting.

z The traffic of the network and the object of the image affect

the frame rate. The network congestion causes frame rate

slower than the setting.

z Check the bandwidth of Internet connection. If the Internet

bandwidth is lower than target bit rate, the video streaming will

not work correctly.

z Ethernet switching hub can smooth the frame rate.

Blank screen or very slow

video when audio is

enabled.

z Your connection to the camera does not have enough

bandwidth to support a higher frame rate for the streamed

image size. Try reducing the video streaming size to 160x120

or 320x240 and/or disabling audio.

z Audio will consume 32 kbps. Disable audio to improve video.

Your Internet connection may not have enough bandwidth to

support streaming audio from the camera.

Image Transfer on e-mail

or FTP does not work.

z Default Gateway and DNS server address should be set up

correctly.

z If FTP does not work properly, ask your ISP or network

administrator about the transferring mode of FTP server.

Pan/Tilt does not work.

(including Click to Center

and Preset Positioning)

z Click Refresh on the Internet Explorer when the

communication stops with the camera. The image will refresh.

z Other clients may be operating Pan/Tilt.

z Pan/Tilt operation has reached the end of corner.

Pan/Tilt does not work

smoothly.

There may be a slight delay when you are using the Pan/Tilt

feature in conjunction with streaming audio and video. If you find

that there is a significant delay while panning or tilting the

camera, try disabling the audio streaming and/or reducing the

video streaming size.

Video quality of the camera

The focus on the camera

is bad.

z The lens is dirty or dust is attached. Fingerprints, dust, stain,

etc. on the lens can degrade the image quality.

The color of the image is

poor or strange.

z Adjust White Balance.

z To insure the images you are viewing are the best they can

be, set the Display property setting (color quality) to 16bit at

least and 24 bit or higher if possible within your computer.

z The configuration on the camera image display is incorrect.

You need to adjust the image related parameters such as

brightness, contrast, hue and sharpness properly.

Image flickers.

z Wrong power line frequency makes images flicker. Make sure

the 50 or 60Hz format of your camera.

z If the object is dark, the image will flicker. Make the condition

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK TL-SC3230N Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK TL-SC3230N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info