02
Smart Switch
LEDs
LED Status Indication
Power
On(green) The switch is powered on
Off/
Flashing
The switch is powered off or power supply is
abnormal
System
Flashing The switch works properly
On/Off
The switch is powered off or the switch works
improperly
10/100M
On A device is linked to the corresponding port
Flashing Data is being transmitted or received
Green The linked device is running at 100Mbps
Yellow The linked device is running
at 10Mbps
1000M
On A
device is linked to the corresponding port
Flashing Data is being transmitted or received
Green The linked device is running at 1000Mbps
Yellow The linked device is running at 10/100Mbps
Port Feature
Model 10/100Mbps RJ45 Port 10/100/1000Mbps RJ45 Port SFP Port
TL-SL2218 16 2 2(Combo)
TL-SL2428 24 4 2(Combo)
RESET
With the switch powered on, press Reset button for five seconds to reset the
software setting to its factory default settings.
10/100Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each
has a corresponding 10/100M LED.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding 1000M LED.
SFP Port
Designed to install the SFP module. TL-SL2218/TL-SL2428 features some SFP
transceiver slots that are shared with the associated RJ45 ports. The associated
two ports are referred as a "Combo" port, which means they cannot be used
simultaneously, otherwise only SFP port works. Meanwhile, the a
ssociated two ports
shar
e the same LED. For TL-SL2218, Port 17 shares the same LED with Port 17F and
Port 18 shares the same LED with Port 18F; for TL-SL2428, Port 27 shares the same
LED with Port 27F and Port 28 shares the same LED with Port 28F.
Introduction
