Bedienungsanleitung TP-LINK TL-WA750RE (Seite 22 von 42) (Englisch)

521064

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

TL-WA750RE

150Mbps Universal WiFi Range Extender User Guide

 Gateway - The gateway should be in the same subnet as your IP address.



Note:

1. The IP parameters cannot be configured if you have chosen Smart IP (DHCP). In this

situation the device will automatically configure the IP parameters appropriate to your need.

2. If you are not familiar with the setting items in this page, it's strongly recommended to keep

the provided default values, otherwise may result in lower wireless network performance or

even can't work.

3. If you choose Static IP, the domain name log in function won't work, and you have to use the

IP you set to log in the Range Extender's web based utility.

4.5 Wireless

The Wireless option, improving functionality and performance for wireless network, can help you

make the Range Extender an ideal solution for your wireless network. Here you can create a

wireless local area network just through a few settings. Wireless Settings is used for the

configuration of some basic parameters of the Range Extender. Wireless Security provides three

different security types to secure your data and thus provide greater security for your wireless

network. MAC filtering allows you to control the access of wireless stations to the Range Extender.

Wireless Advanced allows you to configure some advanced parameters for the Range Extender.

Throughput Monitor helps to watch wireless throughput information Wireless statistics enables you

to get detailed information about the current connected wireless stations.

There are six submenus under the Wireless menu (shown in Figure 4-8): Wireless Settings,

Wireless Security, Wireless MAC Filtering, Wireless Advanced, Wireless Statistics and

Throughput Monitor. Click any of them, and you will be able to configure the corresponding

function. The detailed explanations for each submenu are provided below.

Figure 4-8 Wireless menu

4.5.1 Wireless Settings

Selecting Wireless > Wireless Settings will enable you to configure the basic settings for your

wireless network on the screen below (Figure 4-9).This page allows you to configure the wireless

mode for your device. Two operation modes are supported here, including Range Extender

mode 1, and Range Extender mode 2. The only difference between these two modes is that

Range Extender mode 1 has WDS disabled while Range Extender mode 2 has WDS enabled. In

both modes, the Range Extender will relay data to an associated root AP. The range extender

function is enabled meanwhile. The wireless repeater relays signal between its stations and the

root AP for greater wireless range. Since the configurations are almost the same in either

operation mode, here we just take that in Range Extender mode 1 for example.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK TL-WA750RE Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK TL-WA750RE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info