Bedienungsanleitung TP-LINK TL-WA854RE v4 (Seite 2 von 2) (Englisch)

761145

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Q1. What should I do if the Tether app cannot nd my device during

setup?

Try another method by following the steps below:

1. Connect your smartphone to the extender’s network TP-Link_Extender.

2. Launch the Tether app, and select your extender.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the RE LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi password for your host router during the

conguration. Check the password and try again.

Make sure the extender is close to your router, preferably within 16 feet, and away

from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting it up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

Other...

< Settings

My Devices

Local Device

TL-WA854RE

XX-XX-XX-X X-X X-XX

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the RESET button for 1

second. The extender will reboot.

LED Explanation

Method 2: Via a Web Browser

Method 1: Via the Tether App

1. Connect your computer or smartphone to the extender’s network

you are using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address

bar, and log in.

3. View or change extender settings as needed.

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods

below. You can reselect host network, change extended network

settings and more.

http://tplinkrepeater.net

Note: If your extender and router use the same network name, Method 1 is recommended.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and

(EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use the device where wireless devices are not allowed.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device.

Please use this product with care and operate at your own risk.

Tether

For technical support, the user guide and other information, please

visit https://www.tp-link.com/support/, or simply scan the QR code.

If you have any suggestions or needs for our product guides, you

are welcome to email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, please join the

TP-Link Community at https://community.tp-link.com.

Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, try turning o

your cellular data.

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to

your router’s wireless network

WPS connection is in progress.

On/O

Blinking

The extender is on or o.

The system is starting up or rmware upgrade is in

progress.

Indicates the Wi-Fi connection between the

extender and the router. More lit LEDs indicates a

better signal strength.

Power

(Signal

Strength)

On/O

Blinking

The extender’s wireless function is enabled or

disabled.

Wireless

On/O

RESET

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK TL-WA854RE v4 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK TL-WA854RE v4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info