Bedienungsanleitung TP-LINK TL-WA860RE v6 (Seite 2 von 2) (Englisch)

761147

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Q1. What should I do if the Tether app cannot nd my device?

• Follow the steps below:

1. Connect your smartphone to the extender’s network TP-Link_Extender.

2. Launch the Tether app, and select your extender.

Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, turn o

your cellular data.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

• You may have entered incorrect Wi-Fi password for your host router during the

conguration. Check the password and try again.

• Make sure the extender is close to your router, preferably within 16 feet, and

away from large electrical appliances.

LED Explanation

Method 2: Via a Web Browser

Method 1: Via the Tether App

1. Connect your computer or smartphone to the extender’s network

If you

are using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address bar,

and log in.

3. View or change extender settings as needed.

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods below.

You can reselect host network, change extended network settings and more.

http://tplinkrepeater.net

Note: If your extender and router use the same network name, Method 1 is recommended.

LED Status Indication (For Range Extender Mode)

The extender is on or o.

The system is starting up or rmware upgrade is in

progress.

The light remains on for 5 minutes when a WPS

connection is established, then turns o.

WPS connection is in progress.

(Power)

On/O

Blinking

On/O

Blinking

The extender is connected to your router’s

wireless network and is in a suitable location.

The extender is receiving a weak signal. Try

relocating it closer to your router.

No wireless connection is established.

(Signal)

WPS

Green

Red

O

Tether

For technical support, the user guide and other information, please

visit https://www.tp-link.com/support, or simply scan the QR code.

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please

• Do not use the device where wireless devices are not allowed.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

• For passthrough devices, plug the power strips into the integrated electrical sockets of

the devices, but devices of the same or another type not be stacked in normal use.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please

use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The

original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

Other...

< Settings

My Devices

Local Device

TL-WA860RE

XX-XX-XX-X X-X X-XX

• If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

• Try setting up via the WPS button.

•

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

•

With the extender powered on, use a pin to press the RESET button for 1 second.

The extender will reboot.

If you have any suggestions or needs for our product guides,

you are welcome to email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, please join the

TP-Link Community at https://community.tp-link.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK TL-WA860RE v6 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK TL-WA860RE v6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info