If Dynamic IP is selected, the Router gets the IP address
automatically from the DHCP server or the ISP. No
conguration should be set and you can go on with the
wireless conguration.
b)
If PPPoE is selected, please enter the User Name and
Password given by your ISP. These elds are
case-sensitive. Then click Next.
a)
3
1
Click Survey button to find the available wireless
networks.
3
The target network‘s SSID will be automatically lled into
the wireless setting page. Select the Security Mode and
enter the Password. Then click Next.
2
Select the SSID of the target network and click Connect.
4
Click Reboot to reboot the Router and make the settings
take eect.
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless
Security is enabled, you need to enter the password you’ve
just set to sucessfully nish the connecting.
Repeater/Client Mode
www.tp-link.com
TP-LINK TECHNOLOGIES CO., LTD.
Access Point Mode
1
Set the wireless parameters. It’s recommended that you rename
anSSID, choose aSecurity Mode and enter a Password.
2
Click Reboot to reboot the Router and make the settings take
eect.
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless Security
is enabled, you need to enter the password you’ve just set to
sucessfully nish the connecting.
AppendixTroubleshooting
How can I restore my Router’s conguration to its
factory default settings?
With the Router powered on, use a pin to press and hold the
Reset button for about 5 seconds before releasing it.
What can I do if I forget my password?
3)
2)
1) Restore the Router’s conguration to its factory default
settings. If you don’t know how to do that, please refer
to How can I restore my Router’s conguration to its
factory default settings?
Try to congure your Router once again by following
the instructions in the previous steps of the QIG.
1
2
For more advanced settings, please refer to the User
Guide in the Resource CD.
USB Features Introduction and Application
To log in the Web Management page, use the default
user name and password: admin, admin.
To connect to the Wireless Network, use the default
password on the label.
Router Configuration
Wireless Router Mode
1
Choose your WAN Connection Type and click
Next to
continue
.
If Dynamic IP is selected, the Router gets the IP address
automatically from the DHCP server or the ISP. No
conguration is needed and you can go on with the wireless
conguration.
c)
If Static IP is selected, please enter the IP Address and
Subnet Mask given by your ISP. Then click Next.
d)
If PPPoE is selected, please enter the User Name and
Password given by your ISP. These elds are case-sensitive.
Then click Next.
3
Click Reboot to reboot the Router and make the settings take
eect.
If you don't know the connection type your ISP provides,
you can choose Auto-Detect to allow the Quick Setup to
search your Internet connection for servers and protocols
and determine your ISP conguration. Make sure the cable
is securely plugged into the WAN port before detection.
b)
2
Set the wireless parameters. It’s recommended that you
rename anSSID, choose aSecurity Type and enter a
Password. Then click Next.
Repeater Mode and Client Mode conguration are quite familiar, except you can choose Universal or WDS in Repeater Mode. Here we take Repeater Mode as an example.)
Choose your WAN Connection Type and click
Next to
continue
.
1
c)
If Static IP is selected, please enter the IP Address,
Subnet Mask, Default Gateway and Primary DNS given
by your ISP. Then click Next.
2
Click Suvery buttonto nd the available wireless networks. Select the SSID of the target network and click Connect.
Then the SSID and BSSID will be automaticlly lled into
the wireless setting gure. Select the Key type and enter
the Password. Then click Next.
Click Reboot to reboot the Router and make the settings
take eect.
5
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless Security
is enabled, you need to enter the password you’ve just set to
sucessfully nish the connecting.
After the rebooting, please reconnect to the network
according to Instant Wireless Connection. If Wireless Security
is enabled, you need to enter the password you’ve just set to
sucessfully nish the connecting.
The USB port on the TL-WR710N can be used to share your file,
media, storage, and space across your local network.
Scan the QR code to access the
Application Guide for USB features.
http://www.tp-link.com/app/usb
Local Storage Sharing
Media Sharing
Technical Support
For all other technical support, please contact us by using the following details:
Global
Tel: +86 755 2650 4400
E-mail: support@tp-link.com
Service time: 24hrs, 7 days a week
Singapore
Tel: +65 6284 0493
E-mail: support.sg@tp-link.com
Service time: 24hrs, 7 days a week
Germany / Austria
Tel :+49 1805 875 465 (German Service)
+49 1805 TPLINK
+43 820 820 360
E-mail: support.de@tp-link.com
Fee: 0.14 EUR/min from the German
xed phone network and up to 0.42EUR/min
from mobile phone.
Service Time: Monday to Friday, 09:00 to 12:30
and 13:30 to 17:30. GMT+1 or GMT+2
(Daylight Saving Time in Germany)
* Except bank holidays in Hesse
USA/Canada
Toll Free: +1 866 225 8139
E-mail: support.usa@tp-link.com
Service time: 24hrs, 7days a week
Australia/New Zealand
Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: support.au@tp-link.com (Australia)
support.nz@tp-link.com (New Zealand)
Service time: 24hrs, 7 days a week
For more troubleshooting help, go to
http://www.tp-link.com/en/support/faq
To download the latest Firmware, Driver, Utility and User Guide, go to
http://www.tp-link.com/en/support/download
France
Tel: +33 (0) 820 800 860 (French service)
Email: support.fr@tp-link.com
Fee: 0.118 EUR/min from France
Service time: Monday to Friday, 09:00 to
18:00 *Except French Bank holidays
132
Choose the Working Mode you need, and then click Next.
Open a Web browser, type http://tplinklogin.net in the
address eld, and press Enter. At the prompt, enter the
default User Name and Password: admin, both in lower
case letters. Click OK.
After a successful login, you can click the Quick Setup
menu to quickly congure your Router. Click Next.
4
Congure the Wireless Settings according to the mode you choose.
(TL-WR710N supports five working modes, including Wireless
Router, Access Point, Repeater, Client and WISP Client Router . )
The USB port on the TL-WR710N can be used for mobile device
charging.
Mobile Device Charging
Storage Sharingand Media Server
Charging
For more details about the USB Features and Settings, please refer to the User Guide on the Resource CD.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für TP-LINK TL-WR710N wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
