Bedienungsanleitung TP-LINK TL-WR840N (Seite 2 von 2) (Englisch)

664706

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Tether App

The TP-Link Tether app provides a simple, intuitive way to access and manage

your router. Scan the QR code to download Tether from the Apple App Store or

Google Play.

FAQ (Frequently Asked Questions)

Range Extender Mode

1. Configure

A. Place the router next to your host router and turn it on.

B. Connect a computer to the router via an Ethernet cable or wirelessly by

using the SSID (network name) and Wireless Password printed on the

label at the bottom of the router.

C. Launch a web browser and enter http://tplinkwifi.net in the address bar.

Use admin for both the username and password, and then click Login.

In Range Extender mode, the router boosts the existing wireless coverage in your home.

http://tplinkwi.net

admin

D. Click Next to start the Quick Setup. Select Range Extender and follow

the step-by-step instructions to set up the internet connection.

Access Point Mode

In Access Point mode, the router transforms your existing wired network

to a wireless one.

Connect to the wireless network by using the SSID (network name) and

password of the router.

DevicesRouterWired Router

Ethernet4Ethernet3Ethernet1Ethernet2Internet

Ethernet2Internet

A. Turn on the router.

B. Connect the router to your wired router’s Ethernet port via an Ethernet

cable as shown above.

C. Connect a computer to the router via an Ethernet cable or wirelessly by

using the SSID (wireless name) and password printed on the label at the

bottom of the router.

D. Launch a web browser and enter http://tplinkwifi.net in the address bar.

Use admin for both the username and password to log in.

E. Click Next to start the Quick Setup. Select Access Point and follow the

step-by-step instructions to set up the internet connection.

WAN

The extended network shares the same SSID (network name) and password

as those of your host network.

Place the router about halfway between your host router and the Wi-Fi

“dead” zone. The location you choose must be within the range of your

existing host network.

2. Relocate

Extended NetworkHost Network

Devices

Host Router Router

Q1. What should I do if the login window does not appear?

If the computer is set to a static or fixed IP address, change its settings to obtain an IP

address and DNS server address automatically.

Verify that http://tplinkwifi.net or http://192.168.0.1 is correctly entered in the web

browser. Alternatively, enter http://192.168.1.1 in the web browser and press Enter.

Use another web browser and try again.

Reboot your router and try again.

Disable and enable the network adapter being used.

Q2. What should I do if I cannot access the internet when in Router mode?

Check if the internet is working normally by connecting a computer directly to the modem

via an Ethernet cable. If it is not, contact your internet service provider.

whether the WAN IP address is valid or not. If it is, please run the Quick Setup again;

otherwise, check the hardware connection.

Reboot your router and try again.

For cable modem users, log in to the web management page of the router. Go to Network

> MAC Clone, click Clone MAC Address and click Save. Then reboot both the modem and

the router.

Q3. How do I restore the router to its factory default settings?

With the router powered on, press and hold the WPS/RESET button on the back panel of

the router until the LED blinks.

and click Restore. The router will restore and reboot automatically.

Q4. What should I do if I forget my web management page password?

Refer to FAQ > Q3 to reset the router, and then use admin (all lowercase) for both username

and password to log in.

Q5. What should I do if I forget my wireless network password?

The factory default wireless password is printed on the label at the bottom of the router.

Connect a computer directly to the router via an Ethernet cable.

management page, and go to Wireless > Wireless Security to obtain or reset your wireless

password.

For technical support and other information, please visit

http://www.tp-link.com/support

LED Indicator

Solid Orange

Solid Green

Blinking slowly

Blinking quickly

Power is on, but there is no internet connection.

Router Mode: The internet is avaliable.

Range Extender Mode: The router is connected to the host network.

Access Point Mode: At least one of the WAN/LAN ports is connected.

The system is starting up or rmware is being upgraded. Do not disconnect

or power o your router.

WPS connection is in progress. This may take up to 2 minutes.

Status Explanation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK TL-WR840N Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK TL-WR840N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info