664707

TP-LINK TL-WR902AC Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Frequently Asked Questions (FAQ)
Q3. What should I do if I forget the router’s web management
password?
• Refer to FAQ > Q2 to reset the router, and then use the default admin (all
lowercase) for both username and password to log in.
Q4. What should I do if I forget my Wi-Fi password?
• If you have not changed the default wireless password, it can be found on
the label of the router.
• If you have changed the default wilreless password, please log in to the
router’s web management and go to to retrieve Wireless 2.4GHz (or
Wireless 5GHz) > Wireless Security to retrieve or reset your password.
Q5. What should I do if my wireless signal is unstable or too weak?
It may be caused by too much interference.
• Set your wireless channel to a dierent one.
• Choose a location with less obstacles that may block the signal between
the travel router and the host AP. An open corridor or a spacious location is
ideal.
• Move the router to a new location away from Bluetooth devices and other
household electronics, such as cordless phones, microwaves, and baby
monitors, to minimize signal interference.
• When in Range Extender mode, the ideal location to place the router is
halfway between your host AP and the Wi-Fi dead zone. If that is not
possible, place the router closer to your host AP to ensure stable
performance.
Q1. What should I do if there is no internet access?
• If you are using a cable modem, unplug the Ethernet cable and reboot the
modem. Wait until its Online LED is on and stable, and then reconnect the
cable to the modem.
• If you’re in a hotel room or on a trade show, the internet may be limited
and requires that you authenticate for the service or purchase the
internet access.
• If internet access is still unavailable, contact TP-Link Technical Support.
Q2. How do I restore the router to
its factory default settings?
• With the router powered on, use a
pin to press and hold the RESET
button for about five seconds until
all the LEDs start ashing. Then
release the button.
1. Switch the operation mode to Share Hotspot and plug the
router’s power adapter into an electrical outlet.
2. Connect your device to the router wirelessly or via an Ethernet
cable. The Wi-Fi network names and password are on the router’s
label.
3. Launch a web browser and enter http://tplinkwifi.net in the
address bar. Log in with admin (in lowercase) for both username
and password.
4. Click Next to start the Quick Setup.
5. Select your WAN Connection Type. If you’re not sure, please
consult your ISP. Then follow the on-screen instructions to
continue.
6. Click Connect to connect to the corresponding network of the
WISP and enter its password if encrypted.
7. Either customize your
Local Network SSID
and
Password
for the
2.4GHz/5GHz wireless network or keep the default ones, and then
click
Next
.
8. Click Finish to apply the settings.
1. Switch the operation mode to Share ETH and connect the
hardware according to Step A to D in the left diagram.
Tips: Plug a 3G/4G USB modem with a SIM/UIM card into the 3G/4G USB port as
needed.
2. Connect your device to the router wirelessly. The Wi-Fi network
names and password are on the router’s label.
Check whether you can access the internet.
- If yes, neglect the steps below and enjoy the internet.
- If no, continue with the steps below.
3. Launch a web browser and enter http://tplinkwifi.net in the
address bar. Log in with admin (in lowercase) for both username
and password.
4. Click Next to start the Quick Setup.
5. Select your WAN Connection Type. If you are not sure, click Auto
Detect. Then follow the screen instructions to continue.
6. Either customize your
Wireless
Network Name
and
Password
for
the 2.4GHz/5GHz wireless network or keep the default ones, and
then click
Next
.
7. Click Save to apply the settings.
If you have changed the default Wi-Fi name(s) and password(s), you
have to reconnect your wireless devices to the new Wi-Fi network(s).
If you have changed the default Wi-Fi name(s) and password(s), you have
to reconnect your wireless devices to the new Wi-Fi network(s).
Refer to the following scenarios to determine an appropriate operation mode.
7106507523 REV3.0.0
Determine Operation Mode
During Travel
Router Mode (Default)
Hotspot Mode
Router (Default Mode)
Share ETH
The wired network is only limited to one device to connect at a time, but I
want to share the internet with more wireless devices.
ScenarioOperation ModeMode Switch
I want to have internet access from a wireless internet service provider
(WISP), and share the internet with local devices.
I want to access the internet wirelessly, but only a wired network is available.
I am in a Wi-Fi "dead zone" or a place with weak wireless signal. I want to
have a larger range of the wireless signal for a better internet connection
throughout my home or office.
I have a wired-only device, for example, a smart TV, media player, or game
console. I want to connect it to my wireless network.
Hotspot
Access Point
Range Extender
Client
Share Hotspot
AP/Rng Ext/Client
Internet
B C DA
A B
Public Hotspot
AC750 Wi-Fi Travel Router
Quick Installation Guide
TL-WR902AC
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

tp-link-tl-wr902ac

Suche zurücksetzen

  • Once i configured hotspot sharing the original WiFi (tp-link_F900) disappeared. How do i re-configure? Eingereicht am 27-3-2019 23:56

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TP-LINK TL-WR902AC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von TP-LINK TL-WR902AC

TP-LINK TL-WR902AC Bedienungsanleitung - Englisch - 221 seiten

TP-LINK TL-WR902AC Kurzanleitung - Alle Sprachen - 63 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info