Bedienungsanleitung TP-LINK Touch P5 AC1900 (Seite 16 von 115) (Englisch)

605815

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

13Chapter 2 . Congure Touch P5 as a Router

2. Select the wireless network 2.4GHz or 5GHz and select Hide SSID, and your SSID will not broadcast. Your SSID won’t

display when you scan for local wireless network list on your wireless device and you need to manually join the network.

To change the security option:

Select the wireless network 2.4GHz or 5GHz and choose your Security Type, and enter the corresponding encryption

parameters, your Touch P5 provides four options:

• No Security: Select this option to disable the wireless security.

• WPA/WPA2-Personal (Recommended): Select this option to enable the standard authentication method based on a Pre-

shared Key (PSK), also called passphrase. Its security level is the highest.

• WPA/WPA2-Enterprise: Select this option to enable the more advanced authentication method using a RADIUS (Remote

Authentication Dial In User Service) server. If selected, WPS function will be disabled.

• WEP: Select this option to enable basic authentication method if any of your client devices can only access the wireless

using WEP (Wired Equivalent Privacy).

To change the mode, channel width, channel or transmit power:

Select the wireless network 2.4GHz or 5GHz.

Mode: Select the desired mode.

• 802.11n only: Select only if all of your wireless clients are 802.11n devices.

• 802.11g/n mixed: Select if you are using both 802.11b and 802.11g wireless clients.

• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 802.11g, and 802.11n wireless clients.

Note: When 802.11n only mode is selected, only 802.11n wireless stations can connect to your Touch P5. It is strongly

recommended that you select 802.11b/g/n mixed, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to

your Touch P5.

• 802.11ac only (For 5GHz): Select only if all of your wireless clients are 802.11ac devices.

• 802.11n/ac mixed (For 5GHz): Select if you are using both 802.11n and 802.11ac wireless clients.

• 802.11a/n/ac mixed (For 5GHz): Select if you are using a mix of 802.11a, 802.11n and 802.11ac wireless clients. It is strongly

recommended that you select 802.11a/n/ac mixed.

Channel Width: Select the channel width from the list. The default setting is Auto, which can adjust the channel width for your

clients automatically.

Channel: Select the channel you want to use from the list. This field determines which operating frequency will be used. It

is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

Transmit Power: Select either High, Middle, or Low to specify the data transmit power. The default and recommended setting

is High.

Advanced wireless settings:

Advanced wireless settings are for those have a network concept. If you are not familiar with the settings on this page,

it’s strongly recommended that you keep the provided default values; otherwise it may result in lower wireless network

performance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK Touch P5 AC1900 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK Touch P5 AC1900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info