Bedienungsanleitung Trebs 49200 (Seite 6 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch, Schwedisch)

803068

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

ADDING NEW DEVICES.

Open the Smart Life App, choose “add device” or “+” in the top right corner of the App home page. You can select

one of two methods to connect with the 49200 (Max+Infrared sensor+UV).

- Auto Scan (Recommended)

- Add manually

Auto Scan

1. Make sure you are connected to WiFi and that Bluetooth is on.

2. Turn on the 49200 and activate the WiFi function by long pressing the Timer button for 5 seconds until a WiFi

icons appears on the control panel.

3. In the app start screen, press “+” in the top right corner and select Auto Scan.

The app will scan the area for Smart life applicable devices.

All smart devices compatible with the Smart Life app will appear on screen.

4. Make sure only the Trebs 49200 device is checked, and press “+” WiFi device.

5. The app confirms the connection has been made and the 49200 has been added to your Smart Life account.

6. Press next to continue or change the name by tapping the pencil next to the Max+Infrared sensor+Uv.

7. Once finished, the Smart Life app will automatically open the Trebs 49200 control panel.

Add 49200 manually (AP mode)

1. Make sure you are connected to WiFi and that Bluetooth is on.

2. Turn on the 49200 and activate the WiFi function by long pressing the Timer button for 7 seconds until a WiFi

icon is blinking slowly on the control panel.

3. In the App start screen press “+” in the top right corner and select add device manually.

4. Select “small household appliances” in the group list overview and select “Air purifier (BLE+WiFi)” in the

product section.

5. Confirm that the WLAN symbol is blinking slowly on the 49200.

6. Confirm the WiFi internet connection which is being used by the Smart Life app

7. The app now requests to change the internet connection to SmartLife-8C46.

Go to WiFi settings and manually connect with SmartLife-8C46.

8. Switch back to the Smart life App.

9. The 49200 will auto register to your account.

10. Press next to continue or change the name by tapping the pencil next to the “Max+Infrared sensor+Uv”.

11. Once finished, the Smart Life app will automatically open the Trebs 49200 control panel.

FUNCTION INSTRUCTIONS

Power

Through the power button the 49200 can be switched on and switched off without using the app.

An indicator sound will confirm every change.

Mode

By repeatedly pressing the Mode button it is possible to cycle through the different speed options.

The Trebs 49200 has 4 different speed settings: sleep (low), medium, high, automatic (default).

Timer (WiFi)

By pressing the timer shortly the timer function will be activated.

Choose between 2h,4h and 8h timer.

Long press (3sec) the Timer button to activate the WiFi function. The WiFi symbol will be visible when activated

on the top control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trebs 49200 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info