Bedienungsanleitung Trebs 99332 Comfortemp (Seite 17 von 26) (Deutsch, Englisch, Holländisch, Französisch)

650047

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

4 Instructions of LED on the kettle body:

1) Pre-set temperature is 50℃ -- the LED dark green; 70℃--the LED shine blue;80℃--LED shine

purple; 90 ℃--LED light green; 100 ℃--LED shine red;

2) The LED turns on in the process of setting the temperature, heating or keeping warm. When

finish heating the LED turns off.

5 Instructions of Working Status:

Normal mode:

1) Power on → Buzz twice → Indicator light all light up 1 second → LED on kettle body flash red,

green, blue in turn → into standby status

2) After power on, default pre-set temperature is 100℃, press the start button to boil directly.

When water temperature gets 98℃, the kettle starts timing and it will stop heating after 8-10

seconds, then turn into the standby status after buzz twice.

3) If you not press the start button after the pre-set temperature, the corresponding indicator

light shall turn off after 15 seconds, and the kettle turns into the standby status.

4) When start heating after pre-set the temperature, the indicator light turns on, after the

water gets pre-set the temperature kettle stops heating, then buzz twice, and the LED on the

kettle body turns off, the indicator light still keeps shining. Turn into the standby state after a

minute. The boiling water temperature range is +3 degrees.

5) During the heating process, you can set the temperature through the pre-set temperature

button.

Keep warm mode:

1) In standby status, press the start button 3 seconds to turn into the keep warm mode and the

water starts heating. To default the pre-set temperature is 50℃, press the start button 1

second again and the kettle stops working and will turn into the standby status.

2) Turn into keep warm mode, you shall pre-set the temperature first, the corresponding

indicator light turns on: if not press the start button 3 seconds after set the temperature, the

indicator light shall turn off after 15 seconds, and the kettle turns into the standby status. If

you press the start button 3 seconds after pre-set the temperature, then the kettle turns into

the keep warm mode and starts heating. The corresponding indicator light will flash with an

interval of 0.5 seconds.

3) In keep warm mode, when the water temperature gets to the pre-set temperature the first

time, the kettle shall buzz twice, and will not buzz afterwards.

4) After getting the pre-set temperature the first time, the kettle starts to keep warm in 30

minutes, when water temperature will be below the pre-set temperature, the kettle start

heating automatically: after 30 minutes the kettle turns into the keep warm mode and then

into standby status.

5) In keep warm mode, only the corresponding pre-set temperature indicator light flashes,

others light off, until the keep warm stops: in keep warm process, press the pre-set

temperature button into invalid.

6) The keep warm temperature range is 1/+3 degree.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trebs 99332 Comfortemp Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info