Bedienungsanleitung Trebs Comfortice model 99218 (Seite 17 von 28) (Deutsch, Englisch, Holländisch, Französisch)

618957

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

5. Ice making cycle begins. The evaporator in the water tray starts to form ice onto the

evaporator fingers.

6. It takes about 6 to 18 minutes (depending on the water temperature) for the ice making

cycle to complete. Once completed, the water tray will tilt forward; the remaining water

will flow back to the water reservoir and the ice cubes will drop from the fingers. You will

hear a sound as the ices cubes are released. Ice are dropped to the ice basket directly.

7. In about 30 seconds, the water tray will tilt backward. Once the water tray returns to its

leveled position, the second ice making cycle begins.

8. Press “OFF” to stop the machine.

9. If is on, if still want to make ice, then add water to the water tank , same as step

Noted: please take out the ice first, then add one full cup of water, so as to avoid

overflow of water when the ice melt.

10. Also you can set the clock, automatically turn on and turn off time via following steps:

 Set clock: press button “TIME” once, and press “SET” to change the hour, press

button “TIME” twice, and press “SET” to change minute, after setting the right time,

the clock is set successfully.

 Turn On: press button “TIME” three times, to set hour, press four times to set

minutes, waiting for 5 seconds, the “ON” indicator will turn off, then press “SET”

twice, the “TIME” and “ON” indicator in front of the time is on, this setting is

finished.

11. Turn off: press button “TIME” three times ,to set hour, press four times to set minutes,

waiting for 5 seconds, the “OFF” indicator will turn off, then press “SET” three times, the

“TIME”, “ON” and “OFF” indicator in front of the time is on, this setting is finished.

12. When is on, please pull the drawer out, and take out the ice with the ice collecting

tray.

Notice: For best performance, water temperature should be between 7°C and 35°C and

ambient between 15°C and 38°C.

Care and Cleaning / Maintenance

 To ensure the cleanliness of the ice cubes, water in the water reservoir should be

replaced every 24 hours.

 Remove the drain plug to drain remaining water from the water reservoir when the ice

maker will not be used for long period of time.

 Notice: Screw the drain plug back in place after the water has been drained. If the cap is

lost, please call the distributor.

 Always change with fresh water before starting ice production at initial installation or

after long shut-off periods.

 Please clean your ice maker regularly. When cleaning, unplug the unit and remove the

ice cubes. Use a diluted solution of water and vinegar to clean the inside and the outside

surface of the ice maker. Do not spray ice maker with chemicals or diluted agents such as

acids, gasoline or oil. Rinse thoroughly before starting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trebs Comfortice model 99218 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info