817492

Trek eBike Systems 2023 - Bosch Seite 62

62
Zoom out
Zoom in
Vorherige Seite
1/376
Nächste Seite
English – 2
(d) Total distance indicatorTOTAL
(e) Range indicatorRANGE
(f) Service indicator
(g) Charge indicator of the eBike battery
(h) Illumination indicator
(i) Assistance level indicator/value indicator
(j) Trip distance indicatorTRIP
Technical data
On-board computer Purion
Product code BUI215
Non-rechargeable batteriesA) 2 × 3V CR2016
Operating temperature °C –5to+40
Storage temperature °C +10to+40
Protection ratingB) IP55
Weight, approx. kg 0.1
A) We recommend using the batteries offered by Bosch. You can
purchase them from your bicycle dealer
(article number: 1 270 016 819).
B) When the USB cover is closed
The Bosch eBike systems use FreeRTOS (seewww.freertos.org).
Operation
Symbols and their Meaning
Symbol Explanation
Short button press (less than 1 second)
Medium button press (between 1 second
and 2.5 seconds)
Long button press (longer than
2.5seconds)
Start-up
Prerequisites
The eBike can only be switched on when the following re-
quirements are met:
– A sufficiently charged eBike battery is inserted (see oper-
ating instructions for the eBike battery).
– The speed sensor is connected properly (see operating
instructions for the drive unit).
Switching the eBike On and Off
The following options are available for switching on the
eBike:
– Press the on/off button(1) of the on-board computer
with the eBike battery inserted.
– Press the on/off button of the eBike battery (see operat-
ing instructions for the eBike battery).
The drive is activated as soon as you start pedalling (except
if you are using the walk assistance function or if the assist-
ance level is set to OFF). The drive power varies depending
on the assistance level set.
As soon as you stop pedalling when in normal operation, or
as soon as you have reached a speed of25/45km/h, the
drive switches off the assistance. The drive is automatically
reactivated as soon you start pedalling again and the speed
is below25/45km/h.
The following options are available for switching off the
eBike:
– Press the on/off button(1) of the on-board computer.
– Switch off the eBike battery using its on/off button (bi-
cycle manufacturer-specific solutions are possible when
there is no access to the eBike battery on/off button; see
the bicycle manufacturer operating instructions).
The system shuts down after being switched off. This takes
approximately 3seconds. It cannot be switched back on un-
til shutdown has been completed.
If the eBike is not moved for approx. 10min and no button is
pressed on the on-board computer, the eBike switches off
automatically in order to save energy.
Note: Always switch off the eBike when you park the eBike.
Note: If the internal batteries of the on-board computer are
empty, you can still switch on your eBike using the eBike bat-
tery. It is, however, recommended that you replace the in-
ternal batteries of the on-board computer as soon as pos-
sible in order to avoid damage.
Energy supply of the on-board computer
The on-board computer is supplied with voltage by two
CR2016 button cells.
Changing the Coin Cells (see figure A)
If the on-board computer showsLOW BAT on the display,
remove the on-board computer from the handlebars by un-
screwing the fastening screw(3) of the on-board computer.
Open the battery compartment cover(10) using a suitable
coin, remove the used coin cells and insert the newCR2016
coin cells. You can obtain the coin cells recommended by
Bosch from your bicycle dealer.
When inserting the coin cells, ensure that the polarity is cor-
rect.
Close the battery compartment again and fasten the on-
board computer to your eBike's handlebars using the fasten-
ing screw(3).
Switching the push assistance on/off
The walk assistance makes it easier to push your eBike. The
speed in this function depends on the selected gear and can
reach a maximum of 6km/h.
uThe push assistance function must only be used when
pushing the eBike. There is a risk of injury if the wheels
of the eBike are not in contact with the ground while using
the push assistance.
To activate the walk assistance, briefly press the WALK but-
ton on your on-board computer. Once it is activated, press
1 270 020 XBP | (22.02.2023) Bosch eBike Systems
62
… 62 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trek eBike Systems 2023 - Bosch wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info