Bedienungsanleitung Trek eBike Systems 2024 - Bosch (Seite 23 von 376) (Deutsch, Englisch, Holländisch, Französisch)

817491

Zoom out

Zoom in

Vorherige Seite

1/376

Nächste Seite

English – 3

Switching on/shutting down the on-board

computer

To switch on the on-board computer, briefly press the on/

off button(5). The on-board computer can also be switched

on when it is not inserted in the holder (if the internal battery

of the on-board computer is sufficiently charged).

To switch off the on-board computer, press the on/off but-

ton (5).

If the on-board computer is not inserted in the holder, it

automatically switches off after 1minute to save energy if no

button is pressed.

uIf you are not going to be using your eBike for several

weeks, remove the on-board computer from its

holder. Store the on-board computer in a dry environ-

ment at room temperature. Regularly recharge the on-

board computer's internal battery (at least every three

months).

Battery charge indicator of the eBike battery

The battery charge indicator of the eBike battery(i) displays

the state of charge of the eBike battery, not that of the on-

board computer's internal battery. The eBike battery's state

of charge is also indicated by the LEDs on the eBike battery

itself.

In the indicator(i), each bar in the battery symbol repres-

ents approximately 20% capacity:

The eBike battery is fully charged.

The eBike battery should be recharged.

The LEDs of the battery charge indicator on the

eBike battery go out. The capacity for assisting

the drive has been used up, and assistance is

gently switched off. The remaining capacity is

made available for the lighting and the on-

board computer. The indicator flashes. The ca-

pacity of the eBike battery is enough for about

two hours of lighting. This does not account for

other consumers (e.g. automatic gearbox, char-

ging external devices at the USB port).

If the on-board computer is removed from the holder(4),

the state of charge that was last displayed for the eBike bat-

tery is saved. If an eBike is powered by two eBike batteries,

the battery charge indicator for the eBike battery(i) will dis-

play the state of charge of both eBike batteries.

OFF

MPH

KM/H

If an eBike has two eBike batteries inser-

ted into it and both eBike batteries are

charged on the bike, the charging pro-

gress of both eBike batteries will be in-

dicated on the display (the left-hand

eBike battery pack is being charged in

the illustration). You can also tell by the

flashing indicator on the eBike battery

which of the two eBike batteries is being

charged.

Setting the assistance level

On the operating unit(9), you can set how much the drive

assists you while pedalling. The assistance level can be

changed at any time, even while cycling.

Note: In some models, the assistance level may be preset

and cannot be changed. There may also be fewer assistance

levels available than stated here.

The following assistance levels are available as a maximum:

–OFF: Drive assistance is switched off. The eBike can only

be moved by pedalling, as with a normal bicycle. The walk

assistance cannot be activated at this assistance level.

–ECO: Effective assistance with maximum efficiency, for

maximum range

–TOUR/TOUR+:

TOUR: Steady assistance, long range for touring

TOUR+: Dynamic assistance for natural, sporty cycling

(only in conjunction witheMTB)

–SPORT/eMTB:

SPORT: Powerful assistance, for mountain biking and

cycling in urban traffic

eMTB: Optimum assistance whatever the terrain, rapid

acceleration when starting from a standstill, improved dy-

namics and top performance (eMTB only available in

combination with the drive units BDU250P CX, BDU365,

BDU450 CX and BDU480 CX. A software update may be

required.)

–TURBO: Maximum assistance even at a high cadence, for

sporty cycling

To increase the assistance level, press the + button(12) on

the operating unit repeatedly until the required assistance

level appears on indicator (b). To decrease the assistance

level, press the – button(11).

The requested drive power appears on the display(a). The

maximum drive power depends on the selected assistance

level.

When the on-board computer is removed from the

holder(4), the assistance level that was last displayed is

saved; the drive power indicator(a) remains empty.

Interaction between the Drive Unit and Gear-

shifting

The gear shifting should be used with an eBike in the same

way as with a normal bicycle (observe the operating instruc-

tions of your eBike on this point).

Irrespective of the type of gear shifting, it is advisable that

you briefly reduce the pressure on the pedals when changing

gear. This will aid gear shifting and reduce wear on the

powertrain.

By selecting the correct gear, you can increase your speed

and range while applying the same amount of force.

For this reason, follow the gear change recommendations

provided by the indicators (g) and (h) on your display. If in-

dicator (g) is displayed, you should change to a higher gear

with lower cadence. If indicator (h) is displayed, you should

select a lower gear with higher cadence.

Bosch eBike Systems 1 270 020 XBI | (14.02.2023)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trek eBike Systems 2024 - Bosch Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info