Bedienungsanleitung Trek Incite 11i - 2005 (Seite 7 von 10) (Englisch)

775420

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

INCITE 9I AND 11I

Setting the 9i and 11i is done by pushing the three buttons in a specific sequence. The button on the

side of the computer is the

Set

button. The two buttons on the bottom are the left and right

Mode

buttons. If the

Mode

button is called out in the directions without specifying which one, you may

push either one and the computer will accordingly scroll in a different direction.

To set Units (distance and temperature)

This setting tells the computer which conversion to use: metric or SAE (“English”)

1. Cycle

Mode

to Max.

2. Hold

Set

3. Cycle

Mode

to your preferred setting (MPH for miles or KPH for kilometers).

4. Push

Set

to select.

The computer displays the temperature icons.

5. Cycle

Mode

to your preferred setting (F for Fahrenheit, C for Celsius).

6. Push

Set

to select.

The computer returns to the current speed display.

To set Odometer

By default, the odometer always starts at ‘0’. If desired, the odometer can be manually set at another value.

1. Cycle

Mode

to ODO.

2. Hold

Set

The computer displays the bottom row of digits with the first digit flashing.

3. Cycle

Mode

to your preferred value.

4. Press

Set

to select.

The next digit flashes.

5. Repeat steps 3 and 4 until all digits have been selected.

After the last digit is selected, the computer returns to the current speed display.

To set Clock

The clock can be set to 12 hours or 24 hours. When setting your hours value, choose accordingly. You

will set the 12 or 24 hour selection after setting the values.

1. Cycle

Mode

to CLK.

2. Hold

Set

The computer displays the clock, with hours flashing.

3. Cycle

Mode

to your preferred value.

4. Push

Set

to select.

5. Cycle

Mode

to your preferred value for minutes.

6. Push

Set

to select.

7. Cycle

Mode

to your preferred value for hours format (12 or 24).

8. Push

Set

to select.

After the hours format is selected, the computer returns to the current speed display.

Wheel sizes

The 9i and 11i allow you to program the computer to calculate using two different wheel sizes. The

second wheel size allows the computer to calculate using the wheel size of a second bike. For example,

you can use the computer on your road bike with 700c racing wheels, then move it to your mountain

bike with 26” wheels. In both cases, the trip distance and speed will be accurate. The computer adds

the data for the two wheel sizes resulting in the total distance (ODO). In performing these steps, note

that the wheel icon in the upper left corner has two values: Wheel 1 is a circle (Figure 13) and Wheel

2 is a circle with a semi-circle surrounding it.

To set the wheel size

1. Cycle

Mode

to TME.

2. Hold

Set

The wheel selection icon appears in the upper left corner.

3. Cycle

Set

to your preferred wheel.

4. Cycle

Mode

to your preferred wheel size.

For a custom wheel size, see To set a custom wheel size

5. Hold

Set

to select.

The computer returns to the current speed display.

To set the second wheel size, repeat the instructions, but choose the other wheel icon before setting

values.

Setting the computer

Figure 13- Wheel selec-

tion icons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trek Incite 11i - 2005 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info